Investigation on Utility of Plastic Waste as an Additive for Bituminous Concrete Using Wet Process of MixingAuthor : Anurag V. Tiwari andY R M Rao
Volume 7 No.1 January-June 2018 pp 1.5
Plastic waste has become a major environmental issue of concern due to its exponential growth due to rapid urbanization. The present study investigates utility of plastic waste as an additive for bituminous concrete using wet process of mixing. In the present study LDPE and HDPE type of plastic waste are used to modify the bitumen. The results show that addition of 6 percent of bitumen improves the Marshall properties of the mix. Use of plastic to modify the bitumen not only makes the road surface more durable but also it is an eco-friendly way of proper disposal of plastic waste.
Utility of Plastic Waste, Bituminous Concrete, Wet Process of Mixing
 Methods Of Test For Aggregates For Concrete – Part III Specific Gravity, Density, Voids, Absorption And Bulking, IS 2386-3, 1963.
 Methods of Test for Aggregates for Concrete. Part IV Mechanical Properties, Indian Standard, IS 2386 (Part IV), 1963.
 Methods of testing tar and bituminous material – Determination of penetration, IS 1203, 1978.
 Methods for testing tar and bituminous materials – Determination of Softening point IS 120, 1978.
 Methods of testing tar and bituminous materials – Determination of specific gravity, IS 1202, 1978.
 Methods of testing tar and bituminous material – Determination of ductility, IS 1208, 1978.
 C.S Bindu & Dr. K.S.Beena., “Waste plastic as a stabilizing additive in Stone Mastic Asphalt”, International Journal of Engineering and Technology, Vol.2, No. 6, pp. 379-387, 2010.
 A. Das, and P. Chakroborty, “Principles of Transportation Engineering”, Prentice Hall of India, New Delhi, pp. 294-299, 2010.
 Gawande, Amit, G. Zamare, V. C. Renge, Saurabh Tayde, and G. Bharsakale, “An overview on waste plastic utilization in asphalting of roads”, Journal of Engineering Research and Studies, Vol. 3, No. 2, pp. 1-5, 2012.
 Shirish N. Nemade and Prashant V. Thorat, 2013, “Utilization of Polymer Waste for Modification of Bitumen in Road Construction”, Scientific Reviews and Chemical Communications, Vol. 2, No. 3, pp. 198-213.
 Dixit Sandhya and Deepak Rastogi, “Studies on the Improvement of Characteristics of Bitumen with Use of Waste Plastic”, International Journal of Emerging Technology and Advanced Engineering, Vol. 3, No. 3, pp. 895-900, 2013.
 Devesh Ojha, Dilip Kumar, “A Proposed Design of Flexible Pavement using Waste Plastic”, International Journal of Engineering and Management Research, Vol. 4, No. 5, pp. 21-26, 2014.
 Mayura M. Yeole and Vishvas A. Jagtap, “Eco-Friendly Binder In Flexible Pavement”, International Journal of Research in Engineering & Technology, Vol. 2, No. 6, pp 45-50, 2014.
 Modarres, Amir, and Hamidreza Hamedi., “Effect of waste plastic bottles on the stiffness and fatigue properties of modified asphalt mixes”, Materials & Design, Vol. 61, pp. 8-15, 2014.
 D. T. Mohammed, and Z. H. Hussein, “Evaluation of Pyrolisis PET Utilization inAsphalt Binder”, International Journal of Enhanced Research in Science Technology & Engineering, Vol. 3, pp. 114-121, 2014.
 A report by Central Pollution Control Board on Guidelines for Co-processing of Plastic Waste in Cement Kilns, May 2017. [Online], Available: http://www.cpcb.nic.in/wast/plasticwast/Co-processing_