Home»Asian Journal of Engineering and Applied Technology (AJEAT)

Asian Journal of Engineering and Applied Technology (AJEAT)
Asian Journal of Engineering and Applied Technology is a peer-reviewed International research journal aiming at promoting and publishing original high quality research in all disciplines of engineering and applied technology. All research articles submitted to AJEAT should be original in nature, never previously published in any journal or presented in a conference or undergoing such process across the world. All the submissions will be peer-reviewed by the panel of experts associated with particular field. Submitted papers should meet the internationally accepted criteria and manuscripts should follow the style of the journal for the purpose of both reviewing and editing. |
|
AJEAT is covering all aspects of Engineering and Applied Technology areas. Topics include, but are not limited to: |
|
Aerospace engineering |
Industrial engineering |
Editor-in-Chief
Dr. Seshadri Ramkumar
Department of Environmental Toxicology, Texas Tech University, Texas
[email protected]
Editorial Advisory Board
Dr. Kamarul Ariffin Bin Noordin
Department of Electrical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Benjamin T.F. Chung
Department of Mechanical Engineering, University of Akron, Akron, USA
[email protected]
Dr. Mohd Faiz Bin Mohd Salleh
Department of Electrical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Suhana Binti Mohd Said
Department of Electrical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Norrima Binti Mokhtar
Department of Electrical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Mohamadariff
Department of Electrical Engineering, University of Malaya, Malaysia
[email protected]
-
Consistency of University Internship Program in the Philippines Kingie G Micabalo, Ryan D Montilla and Jesszon B. Cano745 Views
Table of Contents
Editorial Note
Editor-in-Chief
Dr. Seshadri Ramkumar
Department of Environmental Toxicology, Texas Tech University, Texas
[email protected]
Editorial Advisory Board
Dr. Kamarul Ariffin Bin Noordin
Department of Electrical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Benjamin T.F. Chung
Department of Mechanical Engineering, University of Akron, Akron, USA
[email protected]
Dr. Mohd Faiz Bin Mohd Salleh
Department of Electrical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Suhana Binti Mohd Said
Department of Electrical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Norrima Binti Mokhtar
Department of Electrical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Mohamadariff
Department of Electrical Engineering, University of Malaya, Malaysia
[email protected]
Articles
Advanced Search
Privacy Statement
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
2021
2020
-
Key Factors for Online Branding Success in India: An ISM Approach
Mandeep Kaur Online Branding, Interpretative structural modeling, Critical Success factors.
-
Recent Trends in Digital Marketing to Develop the Marketing Strategies for Every Marketer
U. Y. Memon and Yogesh KhandreConcept of digital marketing, promotions from marketers, importance of using the technology, trends in digital marketing & opportunities for digital marketers to develop the strategies.
-
A Study on Product Diversification Strategy Adopted by Colgate Contributes to its Brand Loyalty
Yashasvi KanodiaBrand Loyalty, Colgate, Unique Selling Methods, Segmentation strategy, Demographics, Product diversification
-
A Study on Emerging Methods and Ways in Agricultural Sciences: With Reference to Organic Farming
P. K. Paul, R. R. Sinha, A. Bhuimali, P. S. Aithal and Ricardo SaavedraAgriculture, Agricultural Sciences, Organic Farming, Cultivation, Emerging Agriculture, Vertical Agriculture, Corporate Agriculture
-
Design and Development of Can Crushing Machine
Rahul Chakule, Supriya Patil, and Poonam TalmaleAutomation, Cans, Crush Size, Design Consideration, Productivity.
-
Cloud Computing Vis-à-Vis Agricultural Development towards Digital and Smarter Agricultural Informatics Practice
P. K. Paul, R. R. Sinha, P. S. Aithal, Ricardo Saavedra, Bashiru Aremu, and S. MewadaCloud Computing, Information Technology, Agriculture, Agricultural Sciences, Smart Agriculture, Digital Agriculture, IT Applications in Agriculture
-
Cloud Based Secured Log Retrieval Using Fully Homomorphic Encryption
B. Rasina Begum and P.ChithraCloud Security; Logging; Fully Homomorphic Encryption; Decipherment
-
Trending Applications of 3D Printing: A Study
Rakesh Kumar and Santosh Kumar3D Printing, Computer Aided Design, Applications, Challenges, Future Scope.
-
Consistency of University Internship Program in the Philippines
Kingie G Micabalo, Ryan D Montilla and Jesszon B. CanoBusiness, Accountancy, Internship Program, descriptive study, Cebu City, Philippines
-
Factors Determining Adoption of Outsourcing Logistics Functions: A Study of Manufacturing and Trading Sectors in Sri Lanka
C.Liyanagamage and R.RanasingheAdoption of Outsourcing, Logistics, Determinants of Outsourcing, Risk Of Outsourcing
-
University Performance Satisfaction: A Student Experience in the Philippines
Kingie G. Micabalo, Jesszon B. Cano and Ryan D. MontillaCustomer satisfaction, business and accountancy, descriptive study, Mandaue City, Philippines
-
A Tracer Study on Business Administration Program Outcomes
Kingie G. Micabalo and Ryan D. MontillaBusiness administration, program outcomes, descriptive study, Cebu City, Philippines
-
The Effects of Sodium Hydroxide and Soda AQ Content on Mechanical and Physical Properties of Waste Flax Fibre Pulp Reinforced Polymer Composite Sheet
Anupam Kumar, Ramratan and Rohit KumarFlax fiber pulp, Epoxy resin, Hardener, Tensile strength, Impact strength, SEM
-
Assessment of Demographic Characteristics and Self-Actualization Dimensions of Academic Leaders in Tamil Nadu Universities: An Empirical Study
R. Gopinath Self-actualization, Demographic Characteristics, Academic Leaders.
Volume 9, NO.1 January-June
Volume 9, NO.2 July-December
2019
-
Effect of Materials in Life Cycle Energy Assessment: A Case Study of a Single Storey Building
C. Sivapragasam, PL. Meyyappan, Rithu Christy, V. Akila Reddy and S. KarthigaLife Cycle Energy Assessment, eQuest, Energy Simulation, Roofs and Infill Walls
-
Behaviour of Thermal Power Plant Boiler Support Steel Structure under Seismic Excitations
R. Arun Kumar and C. UmaraniBoiler Support Steel Structure, Ground Motion, Equivalent Static, Response Spectrum, Non-Linear Time History, SAP2000, Scale Factor, Mode Shape and Excitations
-
Alpha Amylase, Alpha Glucosidase Inhibition and Profiling of Volatile Compounds of Biologically Active Extracts from Momordica cymbalaria (Hook, Fenzl) Skin and Seeds
E. Abbirami, L. Dinesh Kumar, R. Guna, N. Gayathri and T. SivasudhaMomordica cymbalaria, Anti-Oxidant Activity, In Vitro Anti-Diabetic Activity, GC-MS
-
Seasonality in Nutrient Contents of Edible Green Algae Ulva compressa and Ulva fasciata from Southeast Coast of India
N. Monisha Hyderali, M. Ganesan and K. EswaranUlva compressa, Ulva fasciata, Seasonal Variations, Proximate Analysis, Fatty Acids, Amino Acids, Mineral, Nutritional
-
Determination of Metal Hazard in the Processed E-Waste Types, Floor Dust and Pulverized Epoxy Powder Generated at an E-Waste Handling Site in India
P. Wagdevi, R. Jayakumar, P. Rajaguru, S. Muralidharan, A. Kaja Maideen and Prakasham KarthikeyanE-Waste Handling, Floor Dust, Pulverized Epoxy Powder, Metals
-
Character Segmentation and Skew Correction for Handwritten Devanagari Scripts: A Friends Technique
Ashok Kumar Bathla, Sunil Kumar Gupta and Manish Kumar JindalSegmentation, Compound Character, Devanagari
-
Cloud Computing: An Exploration on Data Integrity and Its Techniques
R. K. Ramesh and K. L. NeelaCSP, Cloud Computing, Data Integrity, NIC, ALCOA, CCAF, BPMN, SEM, PKI, TTP
-
Differential Evaluation Based Secure Ad-Hoc Protocol for Vanets
Tamanna Gandotra and Gurpadam SinghVANET, AODV Protocol, Attacks, Differential Evolution
-
Mechanical Assisted Modification of Halloysite Nano Clay: Characterization and Its Effect on Mechanical Properties of Halloysite-Epoxy Nano Composites
M. Rudresh, B. H. Maruthi, H. P. Nagaswarupa, B. S. Surendra, M. R. Anil Kumar and N. RaghavendraModified Halloysite Clay, Epoxy Nano Composites, Mechanical Properties, Ultrasonication, Clay Concentration
-
The Different Strategies used for the Early Diagnosis of Alzheimer’s Disease
C. S. Sandeep and A. Sukesh KumarAlzheimer’s Disease, Gerontology, Early Diagnosis, Biomarkers, Neuroimaging
-
Association Rule Mining for Intrusion Detection System: A Survey
D. Selvamani and V. SelviData Mining, Network based Intrusion Detection System, Association Rule Mining, Apriori Algorithm
-
Anti-oxidant and Anti-inflammatory Properties of Stem and Root Extracts of Cissus quadrangularis (Veldt Grape)
L. Dinesh Kumar, R. Guna, E. Abbirami, N. Gayathri, R. Karthik and T. SivasudhaCissus quadrangularis, Free Radicals, Antioxidants, Inflammation
-
Computation of Risk Severity of the Malicious Node using Adaptive Neuro Fuzzy Inference System (ANFIS)
R. Dharmarajan and V. ThiagarasuWireless Network, Fuzzy Logic, Adaptive Neuro Fuzzy Inference System, Membership Function, KDDCUP dataset, Fuzzy Rules
-
Thrice Filtered Information Energy Based Particle Swarm Feature Selection (TFIE-PSFS) Method Based Artificial Neural Network Classification for Improving Heart Disease Diagnosis
P. Umasankar and V. ThiagarasuArtificial Neural Network, Multi-Layer Perceptron, Heart Disease
-
Study of Effect of Altered Piezometric Heads in Experimental Investigation of Bernoulli’s Equation
Adil Wazeer and Kaushalendra Kumar DubeyBernoulli’s Equation, Piezometric, Total Energy Head, Discharge
-
Investigation of Effect of Pore Shape, Position and Passivation on the Thermoelectric Properties of Porous Armchair Silicene Nanoribbons
Rajneesh Kumari, Deep Kamal Kaur Randhawa and Sukhdeep KaurPore, Nanoribbon, Thermoelectric, Figure of Merit, Thermal Conductivity
-
Phytochemicals: Extraction and Preliminary Investigation of Bioactive Compounds from Rumex Vesicarius and Terminalia Catappa Plant
Anandika Suryavanshi, Anand Murari Saxena, Payal Mago and Manisha KhatriTerminalia Catappa, Rumex Vesicarius, Phytochemical Compounds, Medicinal Properties
-
Effect of Stirring Speed and Stirring Time on Distribution of Nano Al2O3 Particles in Al7075 Metal Matrix Composite
H. P. Raju and M. S. Prashanth ReddyAl7075, Al2O3, SEM, UTM, Stirring Casting
-
NiO and [email protected] Nanomaterials for Enhanced Photocatalytic and Photoluminescence Studies: Green Synthesis Using Lycopodium Linn.
K. R. Basavalingaiah, Udayabhanu, S. Harishkumar, G. Nagaraju and ChikkahanumantharayappaLycopodium, Ag-Nio, Photocatalytic, Photoluminescence
-
Fuzzy Linear Labeling
T. K. Mathew Varkey and T. D. SreenaPath Graph, Square Graph, Duplicate Graph, HGraph, Pn⨀K_1.
AMS: 2010-05C78 -
Identification of Novel Drug-Like Compounds from Momordica cymbalaria as PPAR-γ Agonists: A Molecular Docking Study
E. Abbirami, M. Selvakumar, L. Dinesh Kumar, R. Guna and T. SivasudhaMomordica cymbalaria, PPAR-γ, Anti-diabetic activity, Molecular docking
-
Boundary Extraction and Vessel Width Calculation in Retinal Fundus Images
R. Manjunatha and H. S. SheshadriOD, OPBA, RI, ROP, Tortuosity, Vascular Network
-
Growth, XRD, Mechanical, Optical and SHG Studies of L-Lysine L-Tartaric Acid Crystals
C. Anbulakshmi, P. Selvarajan and S. SelvarajSingle Crystal, Solution Growth, NLO, XRD, Hardness, Transmittance, Band Gap, Stiffness Constant, Yield Strength, SHG
-
Study of Properties of Differential Transform Method for Solving the Linear Differential Equation
Nandita DasDifferential Transformation Method, DTM, Taylor Series, Linear Properties, Differential Equations
-
Elemental Contamination in Various Species of Birds from Select States in India
Kirubhanandhini Venkatasalam, Muralidharan Subramanian, Ganesan Kittusamy and Shashikant Shivaji JadhavElements, Birds, Tissues, Bio-Indicators, Toxic, Contamination
-
Ecofriendly Decolorisation of Textile Waste Water Using Natural Coagulants
P. Sasirekha, S. Shankar Krishna, S. Vembukumar and L. VigneshNatural Coagulants, Decolorisation, Wastewater, Ecofriendly
-
An Intelligent Multimedia Data Encryption and Compression and Secure Data Transmission of Public Cloud
Sheik SaidhbiEncryption, Compression, Data Security, ECB
-
Modified Form of Cayley Hash Function
V. Vibitha Kochamani and P. L. LillyCayley Hash Function, Discrete Heisenberg Group, Cayley Graph, Hash Function
-
Edge Waves in an Initially Stressed Visco-Poroelastic Plate under Plane Stress Condition
Rajitha Gurijala and Malla Reddy PeratiVisco-Poroelastic Plate, Initial Stress, Frequency,Attenuation
-
A Signature Based Intrusion Detection System with HPFSM and Fuzzy Based Classification Method (IDSFSC)
S. Latha and Sinthu Janita PrakashFeature Selection, Intrusion Detection System, Association Rule Mining, Apriori Algorithm, Artificial Neural Network, Aho-Corasick Pattern Matching Algorithm, Gain Ratio, Chi-Square Analysis
-
Norm Convergence in the Space of Hyper-functions
A. N. Deepthi and N. R. MangalambalHyper Functions, Normed Spaces, Banach Spaces
-
Experimental Investigation of Flow and Mechanical Properties of Fibrofor Fiber Reinforced Self-Compacting Concrete
H. R. Arun Kumar and B. ShivakumaraswamyFibrofor Fiber, Self-Compacting Concrete, Fresh Properties, Mechanical Properties
-
Pivoting Lean Manufacturing through Industry 4.0 in the Indian Context
Protik Basu and Pranab K. DanIndustry 4.0, Lean Manufacturing, Lean Implementation
-
Perturbation Analysis of Rivlin-Ericksen Fluid on Heat Transfer in the Presence of Heat Absorption
Y. Sudarshan Reddy, K. S. Balamurugan and G. DharmaiahVariable Temperature, Vertical Plate, Suction, Heat Absorption, Rivlin-Ericksen Flow
-
Modeling and Optimization of Carbon Dioxide Removal in Packed Bed Column Reactor
K. ThirugnanasambandhamCO2 Capture, Packed Bed Column, Poly-(D) Glucosamine, Adsorption, Optimization
-
A Comparative Study of Swarm Intelligence-Based Optimization Algorithms in WSN
Aya Ayad Hussein and Rajaaaldeen Abd KhalidWSN, SI-Based Optimization Algorithms, Ant Colony Optimization (ACO), Particle Swarm Optimization (PSO), Artificial Bee Colony (ABC)
Volume 8, NO.1 January-March
Volume 8, NO.2 April-June
Volume 8, NO.3 July-December
2018
-
Investigation of Flexural Behavior of Engineered Cementitious Composites
V. Selvapriya̵̵̵Poly Vinyl Alcohol (PVA fiber), Engineering Cementitious Composities, Flyash
-
Experimental Study on Self Compacted Concrete Mix Using Admixtures and Accessing its Performance By Comparing with Conventional Concrete (M25)
S .Vivek ,R. Sulekha and G. Sri HariniConcrete, self-compactingconcrete, compressive strength, water cement ratio, plastic properties, hardened concrete, etc
-
Study of Black Cotton Soil Characteristics with Molasses
S. Vinodhkumar , P. Kulanthaivel , A. Kabilan and K. M. LokeshkannaMolasses, Stabilization, UCS
-
Assessment of Hydrocarbon Oil Spill Pollutants in Agricultural Land
R. Arivarasan, D. Sathishkumar and M. RengasamyBiodegradation, Contaminated soil, Environment, Hydrocarbon
-
Investigation on Flexural Behaviour of Cold Formed Steel Latticed Built-Up I Section with Drop Web
N. Nandhini and K. SudhaAbaqus, Built up Beam, Cold formed section, Drop Web, Latticed
-
Mumbai Metro Line-3: Initial Drive of Tunneling Activities in Package 04
Ojas Vora , Avinash More and E.ThinakaranMumbai Metro Line-3, Package 04, Tunneling Activities, Environmental Impacts
-
Effect of Lithium Based Admixtures on Alkali Silica Reaction in Concrete and Flexural Behavior of Reinforced Concrete Rectangular Beams
S. Sathya and R. ManjuAlkali Aggregate Reaction, Cracks, Lithium admixtures, Optimum Dosage, Mechanical Properties, Durability Properties, Flexural Property
-
Comparison on the Properties of Various Alternative Materials for Replacing River Sand in Structural Elements
Theivabharathi , Manjuladevi , S.Rajalakshmi and A.VishnuConserve, Economize, Copper slag, M-sand
-
Effect of pH and Electrolysis Time on Removal of Reactive Black B dye by Electrochemical Treatment
S.Manikandan , R.Saraswathi and A.Mohammed Siraj AnsariReactive Black B, Aluminum, Color, pH, Efficiency
-
Experimental Study on Effect of Varying L/D Ratios of Steel Slag Columns on Bearing Capacity of Soft Clay
K. Vaitheswari and S. SathyapriyaStone columns, Granulated steel slag, Triangular pattern, Settlement reduction factor
-
Assessment of Surface Water Quality of Noyyal River Using Wasp Model
G. Mahalakshmi , M. Kumar and T. RamasamyWater Quality, Water Environmental Management, WASP, Nitrate, DO, TDS, pH
-
Swell and Consolidation Characteristics of Fiber Reinforced Cohesive Soil
I. Rajeena and S. P. JeyapriyaAspect ratio, Expansive soil, Ground improvement technique, Polypropylene fiber, Swell and consolidation, Volume change
-
Influence of Nano Silica on the Geotechnical Properties of Clayey Soil Stabilized with Lime
R. Iswarya and V. SatheeskumarCompaction, Lime, Nano Silica, Plasticity, Stabilization, Unconfined Compressive Strength
-
Optimization of Design Mix Proportion for Saturated Water Absorption of High Performance Concrete
M. Akila and S. ChithraHigh Performance Concrete, Nano Silica, Copper Slag, Optimization, Taguchi Method
-
Mechanical Properties of Self-Compacting Geopolymer Concrete Using Fly Ash and GGBS
S. Thirupathiraj , S. M. Renuka and M. DineshkumarGeopolymer Concrete, Fly Ash, Compressive Strength, Split Tensile Strength, Flexural Strength
-
Comparative Study on the Evaluation of Wind Load on Buildings Using Computational Fluid Dynamics and IS: 875(Part-3)
J. Ashok , Shirlin Charles and C. UmaraniComputational Fluid Dynamics, Wind load, Coefficient of Pressure and ANSYS Fluent
-
Study on Steel Fibre Reinforced Self Compacting Concrete
A. Venkateshwaran , K. Nandhini and V. PonmalarMicro Silica, Nano Silica, Passing Ability, SCC, Steel Fibre
-
Simulation of Urban Drainage System Using a Storm Water Management Model (SWMM)
Vinay Ashok Rangari , Sriramoju Sai Prashanth , N. V. Umamahesh and Ajey Kumar PatelUrban Flood, Storm water, SWMM, GIS, NIT Warangal, Rainfall–Runoff Simulation
-
A Study on Dredged Sea Sand as an Optimum Replacement for Fine Aggregate in Concrete
R. Manigandan , V. Srinivasan and K. C. PazhaniCompressive Strength, Tensile Strength, Flexural Strength, Water absorption
-
Experimental Studies on Fibre Integrated Lightweight Concrete Frames Under Lateral Forces: A Review
M. Muthulakshmi and M. Vinod Kumar Lateral force, Pumice aggregate, RC portal frame, Steel fibre
-
Investigation of Flexural Behavior of Engineered Cementitious Composites
V. Selvapriya̵̵̵Poly Vinyl Alcohol (PVA fiber), Engineering Cementitious Composities, Flyash
-
Experimental Study on Self Compacted Concrete Mix Using Admixtures and Accessing its Performance By Comparing with Conventional Concrete (M25)
S .Vivek ,R. Sulekha and G. Sri Harini Concrete, self-compactingconcrete, compressive strength, water cement ratio, plastic properties, hardened concrete, etc
-
Study of Black Cotton Soil Characteristics with Molasses
S. Vinodhkumar , P. Kulanthaivel , A. Kabilan and K. M. Lokeshkanna Molasses, Stabilization, UCS
-
Assessment of Hydrocarbon Oil Spill Pollutants in Agricultural Land
R. Arivarasan , D. Sathishkumar and M. Rengasamy Biodegradation, Contaminated soil, Environment, Hydrocarbon
-
Investigation on Flexural Behaviour of Cold Formed Steel Latticed Built-Up I Section with Drop Web
N. Nandhini and K. Sudha Abaqus, Built up Beam, Cold formed section, Drop Web, Latticed
-
Mumbai Metro Line-3: Initial Drive of Tunneling Activities in Package 04
Ojas Vora , Avinash More and E.Thinakaran Mumbai Metro Line-3, Package 04, Tunneling Activities, Environmental Impacts
-
Effect of Lithium Based Admixtures on Alkali Silica Reaction in Concrete and Flexural Behavior of Reinforced Concrete Rectangular Beams
S. Sathya and R. Manju Alkali Aggregate Reaction, Cracks, Lithium admixtures, Optimum Dosage, Mechanical Properties, Durability Properties, Flexural Property
-
Comparison on the Properties of Various Alternative Materials for Replacing River Sand in Structural Elements
Theivabharathi , Manjuladevi , S.Rajalakshmi and A.VishnuConserve, Economize, Copper slag, M-sand
-
Experimental Study on Effect of Varying L/D Ratios of Steel Slag Columns on Bearing Capacity of Soft Clay
K. Vaitheswari and S. Sathyapriya Stone columns, Granulated steel slag, Triangular pattern, Settlement reduction factor
-
Assessment of Surface Water Quality of Noyyal River Using Wasp Model
G. Mahalakshmi , M. Kumar andT. Ramasamy Water Quality, Water Environmental Management, WASP, Nitrate, DO, TDS, pH
-
Swell and Consolidation Characteristics of Fiber Reinforced Cohesive Soil
Rajeena and S. P. Jeyapriya Aspect ratio, Expansive soil, Ground improvement technique, Polypropylene fiber, Swell and consolidation, Volume change
-
Influence of Nano Silica on the Geotechnical Properties of Clayey Soil Stabilized with Lime
R. Iswarya and V. SatheeskumarCompaction, Lime, Nano Silica, Plasticity, Stabilization, Unconfined Compressive Strength
-
Optimization of Design Mix Proportion for Saturated Water Absorption of High Performance Concrete
M. Akila and S. ChithraHigh Performance Concrete, Nano Silica, Copper Slag, Optimization, Taguchi Method
-
Mechanical Properties of Self-Compacting Geopolymer Concrete Using Fly Ash and GGBS
S. Thirupathiraj , S. M. Renuka and M. Dineshkumar Geopolymer Concrete, Fly Ash, Compressive Strength, Split Tensile Strength, Flexural Strength
-
Comparative Study on the Evaluation of Wind Load on Buildings Using Computational Fluid Dynamics and IS: 875(Part-3)
J. Ashok , Shirlin Charles and C. UmaraniComputational Fluid Dynamics, Wind load, Coefficient of Pressure and ANSYS Fluent
-
Study on Steel Fibre Reinforced Self Compacting Concrete
A. Venkateshwaran , K. Nandhini and V. PonmalarMicro Silica, Nano Silica, Passing Ability, SCC, Steel Fibre
-
Simulation of Urban Drainage System Using a Storm Water Management Model (SWMM)
Vinay Ashok Rangari , Sriramoju Sai Prashanth , N. V. Umamahesh and Ajey Kumar PatelUrban Flood, Storm water, SWMM, GIS, NIT Warangal, Rainfall–Runoff Simulation
-
A Study on Dredged Sea Sand as an Optimum Replacement for Fine Aggregate in Concrete
R. Manigandan , V. Srinivasan and K. C. Pazhani Compressive Strength, Tensile Strength, Flexural Strength, Water absorption
-
Effect of pH and Electrolysis Time on Removal of Reactive Black B dye by Electrochemical Treatment
S.Manikandan , R.Saraswathi and A.Mohammed Siraj AnsariReactive Black B, Aluminum, Color, pH, Efficiency
-
Application of DCT and Weld Harfacing for Enhancing Erosion Resistance of PCBN: A Review
Puneet Pal Singh, Pardeep Kumar and Gurpreet SinghSolid Particle Erosion (SPE), Submerged Arc Welding (SAW), Deep Cryogenic Treatment (DCT), Retained Austenite, Pulverized Coal Burner Nozzle (PCBN)
-
Enhanced Thermoelectric Properties of Armchair Graphene Nanoribbons with Pore Passivation
Sukhdeep Kaur, Deep Kamal Kaur Randhawa and SukhleenBindra NarangNanoribbon, Pore, Passivation, Thermoelectric
-
Environment Friendly Minimum Quantity Lubrication Technique
Roshan Lal VirdiEnvironment Friendly, Minimum Quantity Lubrication, Technique
-
Coatings: A Review
Divya and Rutash MittalHot Corrosion, Thermal Spraying
-
Influence of Tillage Depth and Plough Speed on Performance of Primary Tillage Tools
Jagseer Singh, Sukhpal Singh Chatha and Buta Singh SidhuSoil Loosening, Tillage Tools, Draft Forces, Chisel Plough, Tillage Depth
-
Influence of Plasma Sprayed Coatings on Die Life during Hot Forging Process: A State of Art Review
Simran Singh Gill, Kapil Babbar, Subhash Chander and Vikas ChawlaPlasma Spray, Coatings, Die Failure, Microstructure, Scanning Electron Microscope
-
Optimization of Performance Parameters in Drilling Process for Minimizing the Burr Formation
Jatinder Singh, Kulvinder Garg and Parkash SinghDrilling, Burr Height, Surface Roughness, Taguchi Method
-
Current Status of Prevention of Hot Corrosion of Boiler Steels with Thermal Spray Coating
Gurdeep Singh, Indermeet Singh and Khushdeep GoyalThermal Spray, Microstructure, Corrosion, Porosity, Mechanical Properties
-
Application of Eco-Friendly Cutting Fluids Through Small Quantity Lubrication Technique: A Study
Amrit Pal, Sukhpal Singh Chatha and Hazoor Singh SidhuMQL, Environment, Vegetable oil, Nanofluid
-
Numerical Investigation of Slurry Erosive Wear Due to Multiple Particle Impact
Mithlesh Sharma, Deepak Kumar Goyal and Gagandeep KaushalErosive Wear, Numerical Modeling, Modelling, Explicit
-
Comparative Analysis of Performance and Emission Characteristics of Compression Ignition Engine using Biodiesel and Microemulsion Based Bio Fuel Derived from Grape-seeds
Chandanpreet Singh, Sandeep Singh and A. K. SarmaTransesterification, Microemulsion, Compression Ignition, Oxygenated Additive
-
Fabrication and Characterization of Bioglass
Dalveer Singh, Sandeep Singh and Gurpreet SinghBioactive glass, Characterization, Orthopaedic applications.
-
Multi-Walled CNT Reinforcement to Thermal Spray Coatings
Rakesh Goyal, Buta Singh Sidhu and Vikas ChawlaHot Corrosion, Thermal Spraying, Carbon Nanotubes, Properties, Reinforcements
-
Effect of Rotary Tool on EDM Performance
Manpreet Singh Sidhu and Sukhpal Singh ChathaRotary Electrical Discharge Machining, MRR, TWR and Surface Roughness
-
Laser Texturing as Substrate Preparation Technique for Improved Corrosion Performance on WC-Co HVOF Coatings on AZ91D
Sachpreet Singh Aulakh, Gagandeep Kaushal and Neeraj BalaAZ91D, Corrosion, HVOF, Laser Texturing, Substrate Preparation
-
Fluidized Bed Combustion: Technology for Efficient Utilization of Biomass Residues
Vishal Sharma and Rajeev Kamal SharmaBiomass, Fluidized Bed Combustion, Biomass Utilization Technologies
-
Effect of Minimum Quantity Lubrication in Machining Using Different Vegetable Oils
Satwinder Kaur, Kulwinder Garg and Rutash MittalLubrications Conditions, MQL, Tool Wear and Surface Roughness
-
Experimental Investigation on Effects of MQL on Surface Finish and Tool Wear in Turning of SAE 1018
Sandeep Kumar, Sukhpal Singh Chatha and Rutash MittalMinimum Quantity Lubrication (MQL), Scanning Electron Microscope (SEM), Flood Cooling
-
Corrosion of Stainless Steel and its Prevention through Surface Modification for Biomedical Application: A Review
Srikant Tiwari and S. B. MishraBiomaterial, Implants, Biocompatibility, Tribological, Biological
-
Current Trends in Bio-Implants’ Research
Balraj Singha, Gurpreet Singh and Buta Singh SidhuAdditive Manufacturing, Bioglass, Bio-Implants, Coating, Surface Texturing
-
Green Manufacturing Practices in Manufacturing Industry: A State of Art
Mahakdeep Singh, Kanwarpreet Singh and AmanpreetSinghGreen Manufacturing (GM), Green Supply Chain Management (GSCM)
-
Friction Crush Welding of Similar Metals: An Overview
Prem Singh, Dharmpal Deepak and Gurinder Singh BrarFriction Crush welding, Aluminum, Steel, Microstructure, Scanning Electron Microscope.
-
Numerical Simulation of Free Convection Heat Transfer of Ferrofluid in an Oval Shaped Closed Loop
Jaswinder Singh Mehta, Rajesh Kumar, Harmesh Kumar and Harry GargFerrofluid, Convective Heat Transfer, Thermo-magnetic Convection, Kelvin body Force
-
Parametric Study of Machining on EN31 and EN19 Alloy Steels in WEDM to Analyze the Effect on Surface Roughness
Ramandeep Singh and Ashok KumarWire EDM, EN-31, EN-19, Surface Roughness, Zinc Coated Brass Wire, Work material, Pulse on Time, Pulse off Time, Current, Voltage, Wire Feed
-
Methodology for Selecting Thermoelectric Module for Portable Vaccine Cold Box
Banoth Srinu and Jaya Krishna DevanuriThermoelectric module, Peltier effect, vaccine cold box
-
Fabrication and Analysis of Thermal Insulation Boards from Rice Husk
Deepak DhandRice husk, Rice husk ash, Active silica, Preparation, Characterization, Thermal analysis
-
Analysis of Functionally Graded Cylinders for Different Gradation Law under Coupled Thermo-Mechanical Loading
Amandeep, Abhay and Srikant Sekhar PadheeUSDFLD, Functionally Graded Materials, ABAQUS, Finite Element Analysis
-
Fine Finishing of Extended Surfaces of 316 L Stainless Steel Thin Plate with Magnetic Abrasives
Harnam Singh Farwaha, Dharmpal Deepak and Gurinder Singh BrarMagnetic Abrasive Finishing, Non-Conventional machining process, Percentage Improvement In Surface Finish
-
Finite Element Modelling of Erosion Parameters in Boiler Components
Prashant Kumar Singh, Amit Ranjan Hota and S.B.MishraWC-Co Coating, Erosion wear, Finite Element Modelling, Boiler Component
-
Feature Based Comparison of Text Based Image Retrieval and Context Based Image Retrieval Images
Gagandeep Kaur, Deepam Goyal and Rajeev Kumar DangContext based image retrieval (CBIR), Feature extraction; Text based image retrieval (TBIR)
-
Manufacturing Performance Enhancement Through Various Maintenance Practices in Indian SMEs: A Literature Review
Simranjit Singh Sidhu, Kanwarpreet Singh and I.P.S. AhujaMaintenance practices, SMEs and Manufacturing Performance
-
Modelling and Analysis of Continuous Stirred Tank Reactor through Simulation
S. Anbu and M. SenthilkumarCSTR, SISO, MIMO, Open-Loop, Steady-State
-
Channel Allocation Scheme for Cellular Network Using Fuzzy Logic
Vikas ShindeFuzzy rule, Call dropping probability, Traffic load
-
Growth and Studies of Potassium Dihydrogen Phosphate Crystals Doped With Picric Acid
T.Manju and P.SelvarajanKDP,Doping, Single Crystal, Solution Growth, Characterization, XRD, FTIR, EDAX, NLO, Dielectrics, Thermal Stability, Microhardness
-
Analysis of Traffic Related Environment Pollution in Indian Cities: Need of the Hour
Ankit BansalAir Pollution, Emissions, RSPM, NOX and SOX
-
Static and Fatigue Analysis of Carbon Epoxy Reinforced Composite Leaf Spring
Chatwant Singh Pandher, Gurinder Singh Brar and Tejeet SinghLeaf Spring, Static Test, Fatigue Test, Carbon Fiber, Epoxy Resin
-
Thermodynamic Analysis of Efficiency- NTU Parameters for Parallel Flow Type Heat Exchanger under the Effect of External Heat Leak
Roopesh Tiwari and Govind MaheshwariHeat exchanger, Effectiveness, Efficiency, Heat leak, Heat capacity ratio
-
Thermal Performance of Three Sided Artificially Roughened Double Duct Parallel Flow Solar Air Heater
Chander Kant, Prashant Kumar, Ankur Gill and Dhiraj Parkash DhimanSolar Heater, CFD, Navier-stokes equation, ANSYS FLUENT
-
Selection of Inductor and Snubber Capactor to Optimize the Size and Efficiency of DC-DC Switching Power Converter
N. M. Mahesh Gowda and S. S. ParthasarathySDCM, buck, boost, buck-boost, non-isolated, MATLAB script
-
Mathematical Modeling and Simulation of Enzyme Assisted Bioactive Compound Extraction from Allium Cepa Using Response Surface Methodology
K. ThirugnanasambandhamPhenolic compounds, Onion, Enzyme assisted extraction, Modelling, Optimzation
-
Design and Applied Systematic Matrix Method for Orthogonal MIMO Channel over Fading Channel
Hemlata Sinha, M.R. Meshram and G.R. SinhaMIMO, BER, STBC
-
Simulation and Implementation of Microcontroller Based Printed Circuit Board Ready Circuits for Technical Training and Demonstration
Blessed Olalekan Oyebola and E. Eze BlessingLoad, Matrix, Microcontroller, Motion, Printed, Segment, Simulation
-
Studies on Effect of Different Environmental Conditions on CBR of Black Cotton Soil Reinforced with Coir Fibre
Akhileshwar Swami, Pushpendra Kumar Kushwaha and Mohit GangwarExpansive Soil, Soil Stabilization, Fiber Reinforcement, Coir Fiber, CBR
-
Task Scheduling Algorithm Based on Bacterial Foraging Optimization (BFO) in Cloud Computing
Anupama Gupta, Kulveer Kaur and Rajvir KaurVM migration, Cloudlet, virtual machines, CloudSim
-
Optimization of Process Parameters of Shot Peening for AISI 4340 Steel
Supinderjit Singh, Ankur Gill and Dhiraj Parkash DhimanRSM, ANOVA, Surface Hardness, Surface Roughness, Residual Stresses
-
Factors Influencing University Students’ Performance: A Comparison of Faculties’ Assumptions with Students’ Perceptions
Radheshyam H. Gajghat, Chandrahas C. Handa and Rakesh L. HimteStudents’ Performance, Influencing Factors, Performing Factors, University Examination, Faculties’ Assumptions, Students’ Perceptions
-
A Review on Applications of Kenaf Fibre Reinforced Composites
Sasikumar Gnanasekaran and Sivasangari AyyappanNatural Fibres, Kenaf Fibre, Natural Fibres Composites
-
Role of Dietary Pattern on the Microbial Diversity in the Gut of the Experimental Mice
Rosa J Samuel, Omana Joy, Prakash Piruthiviraj and Thamaraiselvi KaliannanGut, Microbiota, Flow Cytometer, Rodents
-
Impact of Total Quality Management Practices on Quality Performance: A Case Study on Armament Manufacturing Industry
Hagos Berhane and Pramila Devi MagantiTotal Quality Management, Quality Performance, Manufacturing Industry, Regression Analysis
-
Mechanical and Biodegradation Behaviour of Jute/ Polylactic Acid Green Composites
Jai Inder Preet Singh, Sehijpal Singh and Vikas DhawanJute Fibers, Polylactic Acid (PLA), Curing Temperature, Mechanical Characterization, Green Composites, Soil Burial, Bio Degradation
-
Data Mining Approach in Retail Knowledge Discovery and Internet Technologies
Simranjit Kaur and Seema BaghlaData mining, online shopping, SPSS, association technique
-
An Exploration of the Image Processing Techniques for the Detection of Leukemia
A. Premnath and V. S. Meenakshi Image Processing, Leukemia, Blood Cell, Noise Removal, Feature Extraction, Segmentation, Classification
-
Effects of Different Substrates on Rectangular Microstrip Patch Antenna for X-band
Imran Khan, D. Geetha Devanagavi, K. R. Sudhindra, S. Prathibha, C. Shruthi and S. NirmalaANSYS HFSS, Dielectric Constant, Current Distribution, Radiation Pattern
-
A Two-Fold Authentication Mechanism for Network Security
D. Selvamani and V SelviNetwork security, Authentication, Elliptical Curve Cryptography, RSA, Kerberos system, Bit Level, Secret key, Encryption, and Decryption
-
Mobile Cloud Computing: A Literature Survey
Lakshna Arun and T.N.RaviMobile Cloud Computing, Mobile Environments, Mobile Networks
-
Ensuring the Security by Using Fuzzy Based Trust Routing Scheme in MANET
M. Lalli and J. LawanyaMobile Ad Hoc Network, Fuzzy Logic, Fuzzy Trust based Secured Routing, Ad Hoc On-Demand
-
Experimental Studies on n-Octane and Cyclohexane as Organic Solvent for Synthesis of Polyurea Microcapsules by Interfacial Polycondensation
Ujvala P. Christian and Shrikant J. WaghInterfacial Polycondensation, n-Octane, Cyclohexane, Polyurea, Polymerization
-
Privacy Preserving Technique for Data Storage in Cloud Computing
Jagpreet Kaur and Nitin Goel Edge Detection, Cloud Computing, Privacy, Randomisation
-
Detection of Polycystic Ovarian Syndrome: A Literature Survey
A. Saravanan and S. SathiamoorthyPolycystic Ovarian Syndrome, Machine Learning, Denoising, Segmentation, Threshold
-
A New Approach for Non-Ideal Iris Segmentation Using Fuzzy C-Means Clustering Based on Particle Swarm Optimization
Satish Rapaka, Rajeshkumar Pullakura and Jeevan MandelliGeodesic Active Contours (GACs), Fuzzy C-Means, Particle Swarm Optimization (PSO), Iris Recognition System
-
Study of Microstructure 304L Austenitic Stainless Steel Weld Deposited by GTAW for Root Pass and SMAW for Filler Passes
Harsimranjit Singh Randhawa and Sunil Kumar Austenitic stainless steel 304L, GTAW, SMAW, weld heat input, back purging, weldment
-
FPGA Implementation of Reversible Adder/Subtractor
Gowthami. P and R.V.S. Satyanarayana Reversible Adder/Subtractor, Reversible gates
-
A Review Paper on Biodegradable Composites Made from Banana Fibers
Amrinder Singh Pannu , Sehijpal Singh and Vikas Dhawan Polylactic Acid (PLA), Banana fibers, Biodegradable composites, reinforcement, Manufacturing, Treatment
-
Effects of Higher Percentage of Stone Dust Used as a Fine Aggregate in Concrete and Variation of Strength due to the Variation of Cement Content and W/C Ratio
Bikram Paul , Kushal Ghosh and Partha Ghosh Stone Dust, Fine Aggregate, Concrete, Cement, W/C Ratio
-
A Novel Hybrid Framework for Medical Image Retrieval
A. Saravanan , M. Natarajan and S. SathiamoorthyColor autocorrelogram, texture autocorrelogram, chordiogram descriptor
-
Self-Organization Map Based Segmentation of Breast Cancer
A. Arokiyamary Delphina, M. Kamarasan and S. SathiamoorthyBreast Cancer, Mammography, Self-Organizing Map, Euclidean Distance, Validity Measure, Double Bouldin Index
-
A Novel Framework for Detection of Cervical Cancer
V. Pushpalatha, S. Sathiamoorthy and M. KamarasanDual-Tree Discrete Wavelet Transform, Curvelet Transform, Contour Transform, K-Means clustering, Gray Level co-occurance matrix
Volume 7, NO.1 Special Issues April 2018
Volume 7, NO.2 Special Issues November 2018
Volume 7, NO.1 January-June
Volume 7, NO.2 July-December
2017
-
User Task Automator
Himanshu Prasad, P. Geetha Priya, S .Manjunatha, B.H Namratha and Rekha B. VenkatapurTask Automation, Natural Language Processing, Command Extraction, Event Listening
-
Reconfigurable Real Time Signal Capturing through FPGA
B.H.K Bhagat Kumar and S Khadar BhashaCapture FSM, Xilinx ISE, UART
-
Relay Selection in Adaptive Buffer-Aided Space-Time Coding with TAS for Cooperative Wireless Networks
B.Ahvanth and E.RamassamyHybrid relay selection, cooperative systems, buffer-aided relays, Transmit antenna selection, space-time codes.
-
Security Framework for Cloud Based Medical Monitoring System
G.Meera Gandhi, J.John Jasper and Emmanuel AndrewSecurity Framework, Cloud, Medical Sensors, Accuracy, Sensitivity, Specificity, Rabin’s Algorithm.
-
Smart Mesh Networking City by New Method
D.Sivakumar and N.LegapriyadharshiniWireless Mesh Network, Multipurpose Community Telecentre, Deployment, Smart City
-
Internet of Things and Security Challenges in Wireless Sensor Network
Deepika PatilWireless Sensor network, Complementary Semiconductor Metal Oxide (CMOS), Quality of service (QoS)
-
A Prefetching Technique using Apriori and Logistic Methods for the DFS in Cloud
V. Thilaganga and S. SelvamDFS, Piggybacked, Prediction Algorithms
-
Graphics in Combination Handguns Preparation Classification (Gaps)
P.SenthilFirearms shot detection, Geometric recalibration, Photometric recalibration, IR tracking algorithm, Thermography, Ballistics.
-
Integrity and Privacy through Authentication Key Exchange Protocols for Distributed Systems
B. UsharaniAuthenticated key; Exchange Protocols; Kerberos-based approach; Security
-
Hand Gesture Recognition Using Principal Component Analysis
Sunil Kumar, Tanu Srivastava and Raj Shree SinghHand gesture recognition, Eigen values and Eigen vectors, Principal Component Analysis (PCA), Human Computer Interaction (HCI).
-
Semantic Approach for Multifarious Ranked Novelty and Diversity in News Recommendations
Shikha AgarwalUser profile, OWL ontology, recommender system, Semantic Expansion, Novelty, Diversity
-
A Capable System for Hiding Image in an Image
R.Ganesh and S.Thabasu KannanLSB, MSB, RMSE,MSE, PSNR
-
Managing the Data Effectively Using Object Relational Data Store
T. SivagamasundariRelational Embeddable Database, object-relational database, Object Oriented Relational Database, applications programming interfaces
-
Statistical Modelling and Validation of Performance Evaluation of Weather Monitoring System Using Global System for Mobile (GSM) Communication Technology
Iyapo Kamoru Olarewaju, Oni Olatunji Temitope, Odo Ekundare Ayodele and Raimi Oluwole AbiodunGlobal System for Mobile (GSM), weather monitoring system, fabricated, temperature, humidity
Volume 6, NO.1 January-June
Volume 6, NO.2 July-December
2016
-
Comparative Study on Radio Activity Associated with Common Salt Production Process of Two Salt Works in Kanya Kumari and Tuticorin Districts, Tamil Nadu
P. Prema Kumari, K. Mercy Salima and P. EthalshaAlpha, Beta, Gamma activity, salt works, Sea brine
-
Effect of Under Surface Cooling on Tensile Strength of Friction Stir Processed Aluminium Alloy 6082
Haramritpal Singh, Pardeep Kumar and Balwinder SinghFriction stir processing (FSP), tensile strength, under surface cooling, aluminum alloy6082
-
Material Degradation Due to Erosion and Preventive Measures
Balwinder Singh, Pardeep Kumar and Hazoor Singh SidhuErosion, Particles, Hardfacing, Surface Properties
-
Experimental Studies to Validate Computational Fluid Simulation of Coolant Flow Behavior through different Nozzles for Nozzle Effectiveness in Cylindrical Grinding Process to Enhance Workpiece Surface Quality
Mandeep Singh, Yadwinderpal Sharma and Jaskarn SinghANOVA, Cylindrical grinding, flow behavior, workpiece, ANSYS CFX, nozzles, surface roughness
-
Enhancing Durability of Hot Work Tool Steel by Duplex Treatments: A Review
Subhash Chander and Vikas ChawlaDie Failure, Duplex Treatment, Plasma Nitriding, PVD Coatings.
-
Comparing and Optimization of Material Removal Rate of Cryogenically Treated and Untreated Copper Tools Using EDM
Roshan Lal Virdi , Prince Chawla and Supinderjit SinghAdvanced materials, EDM, Cryogenic treatment, Taguchi methodology, Optimization, MRR.
-
Microstructure and Characterization of Detonation Gun Sprayed Al2O3 Coating
Lakhwinder Singh, Neel Kanth Grover, Vikas Chawla and J.S. GrewalAlumina Coatings, Boiler tube steel, Detonation Gun, Thermal spraying.
-
Effect of Concentration of Ti Doping on Optical Properties of Zn1-xTixO (where x=0.0, 0.1, 0.3, 0.5, 0.7 and 0.9) Thin Films Deposited by Spray Pyrolysis
Sansar Chand, Reena Rani and Kamlesh YadavThin films, ZnO, Doping, Spray Pyrolysis.
-
Structural and Dielectric Behaviour of Blend Polymer Electrolyte based on PEO-PAN + LiPF6
Anil Arya, Sweety Sharma, A. L. Sharma, Dinesh Kumar and Mohd SadiqConductivity, Dielectric Permittivity, Electrolyte, Polyethylene oxide, Relaxation Time
-
Electrical Conductivity and Ion Transport Number Analysis of Polymer Nanocomposite Films
Parul Kumar Sharma, Anshul Kumar Sharma, M .Sadiq and A. L. SharmaFTIR,ImpedanceSpectroscopy,Electrical Conductivity
-
The Cold Spray Coating Process: A Future Technique in Material Deposition
Ripandeep Singh, Gurpreet Singh and Hazoor Singh SidhuCold spray, coatings
-
Control Techniques for Synchronizing the States of Two Coupled Van der Pol Oscillators
T. S. Murugesh and M. SenthilkumarNonlinear Oscillator, States of Coupled Oscillators, Van der Pol Equation, Synchronization, Control Technique
-
Internet Corporation for Assigned Names and Numbers: An Overview
P.K. Paul , A. Bhuimali and K.S ShivrajInternet, IT, Information Systems, Internet Protocol, ICANN, WWW, DNS, Internet System, Social Development
-
A Review of Vapour Compression Cascade Refrigeration System
Umesh C. Rajmanecascade refrigeration system, absorption, vapour compression system
-
Experimental Investigation on the Effect of Capillary Tube Geometry on the Performance of Vapor Compression Refrigeration System
Niraj N. Raja and Avinash D. Khanderaovapor compression cycle, capillary tube, and capillary tube geometry, coefficient of performance.
-
Comparative Study of Helical Compression Suspension Spring for Different Materials
Sujit S Patil, Subodh Karunasagar and Shubham Shahcomposite, helical springs
-
Experimental Research on Triple Blended Self-Compacting Geo Polymer Concrete
R.Srinivas Prabhu , R. Anuradha and S.VivekTriple Blended, Srlf-Campacting, Geo Polymer
-
Investigation on the Properties of HPC Exposed to Elevated Temperatures
Assia Aidoud and Abdelhalim BenouisHPC, weight loss, high temperatures, strength, dynamic elastic modulus, explosive.
-
Detection and Counting of Blood Cells in Blood Smear Image
K.Pradeep, C.Ganthimathi, K.Harini and N.DiddhaHepatitis B, Pathological tests, Image Processing, Morphological operations.
Volume 5, NO.1 January-June
Volume 5, NO.2 July-December
2015
-
Studies on the Quality and Heavy Metals in Common Salt Production Using Sea Brine and Sub-Soil Brine in South Tamil Nadu, India
P. Prema Kumari, K. Mercy Salima and P. EthalshaQuality, Common Salt Production, Sea Brine, Sub-Soil Brine
-
Computational Fluid Flow Analysis of High Speed Cryogenic Turbine Using CFX
Sushant Upadhyay, Shreya Srivastava, Siddharth Sagar, Surabhi Singh and Hitesh DimriRadial turbine, Bladegen, Turbogrid, CFX
-
Shape Oscillations of a Particle Coated Bubble during Rise in a Liquid Column
R.Y.Prithvi and Sabita Sarkarshape oscillations; particle coated bubble; single bubble rise ; coating fraction.
-
Improvement in Thermal Efficiency of a CI Engine Using a Waste Heat Recovery Technique
Aashish Sharma Ajay Chauhan, Himanshu Nautiyal, Varun and Pushpendra Kumar SharmaEngine; Efficiency; Ignition; Heat; Recovery
-
Stress Analysis of Pelton Bucket Using Mechanical APDL
Sonendra, Naman Agarwal and T.S.Deshmuk
-
Assessing the Success of Six Sigma: An Empirical Study
S. K. Tiwari, R. K. Singh and S. C. Srivastavagreen sand casting, six sigma, casting defects,Taguchi technique, design of experiment (DOE), orthogonal array (OA), signal-to-noise ratio, analysis of variance (ANOVA).
-
Performance Measures of Queuing Models Using Cloud Computing
K.Ruth Evangelin and V.VidhyaCloud Computing, , Queue length, Waiting time,Queuing Model, QOS.
-
JA Simple Tool for Solving Queuing Model with Erlang Distribution
R.Sakthi, V.Vidhya and T.Dhiki
-
Minimizing the Delay Time of Data Transfer in Access Networks Using Queue Models
G. Arul Freeda Vinodhini and V.VidhyaTwo stage tandem queue, M/M/1 queue, M/M/1 retrial queue, Access networks
-
Preliminary Phytochemical Tests and Antioxidant Potential of Catharanthus Roseus Extracts
P. Ethalsha, P. Prema Kumari and K. Mercy SalimaDPPH Assay, Phytochemicals, Antioxidant, C.roseus
Volume 4, NO.1 January-June
Volume 4, NO.2 July-December
2014
-
Location Detection and Time Monitoring System for Moving Object
Nirupama.Sheelwant and Sandeep.SheelwantMoving Object, Location update, Query Index, Safe Regions, Object index.
-
Opportunities and Challenges of Sensor Networks in Health Care Applications
Jabanjalin Hilda.J and Srimathi.CSensor networks, Telemedicine, Cloud computing Wireless Sensor Network (WSN)
-
Survey on Security Challenges in Warning Message Dissemination and Possible Solutions
Salini Balakrishnan, Tripti C and Robin CyriacIBE, Security, Vulnerabilities, Solutions.
-
Implementation of Digital Pulse Width Modulators Using Frequency Divider Method in FPGA
D. Ramesh Babu and S.KarunakaranDPWM- Digital Pulse Width Modulator, FPGAField Programmable Gate Array, DCM- Digital Clock Manager, and Phase shift
-
A Novel Approach for Data Storage Security in Multicloud Computing
K. Parthiban and V.M.PriyadharshiniMulticloud, security, privacy, cloud, partitioning
-
Healthcare Measurement of ECG and Body Temperature Signals Using Android Mobile
V. Navaneethan and R.KavithaElectrocardiography, GPRS, Global Positioning System, EEG
-
Multi-Path Routing and Wavelength Assignment Algorithm (RWA) for WDM Based Optical Networks
P. Sakthivel and P. Krishna SankarWavelength Assignment; Blocking probability; Optical WDM networks; RMSA; HSMR.
-
Survey on Enhancing Privacy Data Sharing Between Multi-Owners in Cloud for Dynamic Groups
A.Balaji, M.Lokesh, M.Sakthivel, and P.AnbumaniData Sharing, Cloud Users
-
A Pathological Voices Assessment Using Classification
T. Arikrishnan and C.P.DaraniPathological voices, SVM
-
Improving the Performance of User Search Goals Using Noval Approach
J.S. HarilakshmanrajClustering, ranking-algorithm, prioritization process, World Wide Web.
-
Prediction of Effective Thermal Conductivity of Cu/Solder System by Using Interfacial Layer in Two Phase System
Jyoti Rani, K. J. Singh and Ramvir SinghEffective thermal conductivity (ETC), real two phase system, correction term, interfacial layer, resistor model, metal
foam. -
Influence of Zinc Substitution on Physicochemical and In-vitro Behaviour of Nanodimensional Hydroxyapatite
Suchita Kohli, Uma Batra and Seema KapoorHydroxyapatit, Zinc Substitution, Nanopowders, BET Surface Area, Bioactivity.
-
Processing and Charecterisation of Epoxy/Carbon Black Nanocomposites by Twin Screw Extrusion
R.M. Kulkarni, G.B. Rudrakshi and H.N. NarasimhamurthyCarbonblack (CB), orthogonal array (OA), thermo-gravimetric analysis (TGA), DOE:design of experiment, analysis of variance (ANOVA).
-
Development and Characterization of Aluminium Based Matrix Using 5% Fly Ash
Karamjot Singh, Gagandeep Kaushal and Hazoor Singh SidhuMMCs, AMC, Stir Casting, Al-6063, Fly ash
-
A System for Computer-Aided Gating Design for Single and Multi-Cavity Injection Moulds
Vijay Kumar1 and Roshan Lal VirdiInjection Moulding, Mould Design, Multi-Cavity,Gating Design, Computer-Aided Design.
-
Performance Investigation of Topologically Optimized Manipulator Link
Aditya Kulkarni and Arshad JavedRobotic/Manipulator-link, Mass reduction, Joint-Torque reduction, Topology optimization, SIMP.
-
Finite Element Analysis of Magneto-Rheological Damper
Ashwani Kumar and S. K. MangalFinite Element Model, MR damper, Axisymmetric,Magnetic flux density.
-
Effect of L/D Ratio and the Temperature on MR Fluid Squeeze Film Damper Performance
G. Saravanakumar and L. RavikumarSqueeze film damper, Magnetorheological fluid, Temperature effect, Magnetic field intensity, Frequency, L/D ratio.
-
Elimination of Hydrogen Induced Cracks by Slow Cooling After Hot Rolling of Medium Carbon Molybdenum Steel Blooms
D. Ravichandar, K.B. Nagashanmugam and T. BalusamJDM 1046, ultrasonic defect, hydrogen induced cracks, air cooling, slow cooling, microstructure, hardness,blooms, bars.
-
Study and Analysis on Differernt Flow Arrangements Using Different Fluids in Micro Channel Heat Sink for High Performance
Neeraj Kumar, Nirmal Kant Singh and Harry GargSimulation of MCHS using flow simulation in solid works.
-
Dynamic Analysis of Bajaj Pulsar 150cc Connecting Rod Using ANSYS 14.0
Amit Kumar, Bhingole P.P and Dinesh KumarFinite element modeling, dynamic analysis, connecting rod, weight reduction
-
Study and Implementation of Quality Improvement Techniques to Improve the Consistency in Cold Crushing Strength of Iron Ore Pellets
Aditya Sarda, Naik Nithesh, Navneeth Krishna, Tarun Shrivastva and Arun PrabhuAbrasion Index, Porosity, Tumbler Index, Blaine Number
-
Effect of “U” Shaped and Dome Shaped Baffl es on Damping for Slosh Supression
R. Mothilal, S. Rajendran and T. SundararajanPropellant, slosh, baffles, “U”shaped baffle, Dome shaped baffle, damping ratio.
-
Some Investigations on Surface Quality of Aluminium Matrix Composite Developed Using Modifi ed FDM Pattern Based Rapid Investment Casting
Rupinder Singh, Jagdeep Singh and Sunpreet SinghAluminium Matrix Composite, Fused Deposition Modelling, Investment Casting, Surface Roughness.
Volume 3, NO.1 January-June
Volume 3, NO.2 July-December
2013
-
Image Fusion Methods and Quality Assessment Parameters
Varsha Patil, Deepali Sale and M.A.JoshiImage fusion, IHS, PCA, PSNR, Average difference, NAE
-
Detection of Faults Using Digital Image Processing Technique
Jagrti Patel, Meghna Jain and Papiya DuttaImage processing, MATLAB 7.10, Gray image, Histogram, Thresholding
-
Implementation of ReBISR Scheme for RAMs using Spare Elements
Shweta MeenaMemory built-in self test (MBIST), Built-in redundancy analysis (BIRA), Writing0/ writing1 algorithm
-
C-Band Vivaldi Antenna and Its Array
Saurabh Shukla, Naveen Upadhyay, Sandhya Sharma and Naveen HemrajaniVivaldi Antenna, IEEE C-Band, Return Loss, Half Power beamwidth, H-plane Array
-
Indexing Genome with the External Construction of Compressed Suffix Tree Using LCP Array
Vijay Kumar Vishwakarma and Abhishek SrivastavaGenome Indexing, Compressed Suffix Tree, Data Structure, DNA Indexing
-
CRN Application to Predict the NOx Emissions for Industrial Combustion Chamber
Nguyen Thanh Hao and Park JungkyuIndustrial Combustion Chamber, NOx Emissions,Chemical Reactor Networks (CRN), Computational Fluid Dynamics (CFD)
-
Application of Synthesised Zeolite A from Kankara Kaolin for Solar Adsorption Refrigeration
Ityona Amber, Clement.O Folayan, Rekiyah B.O.Suleiman and Abdulazeez Yusuf AttaZeolite A, Adsorption, Desorption, Refrigeration, Solar, Kankara DTA/TGA
-
Optimisation of High Frequency Seam Welding Parameters By Taguchi Method
Satish Garg, SS Banwait and Ravneet KumarSelf High Frequency Pipe welding, Welding current and frequency, Tensile strength, Taguchi Method.
-
Characterisation of Biodiesel Derived From Waste Cotton Seed Oil and Waste Mustard Oil
Sandeep Singh, Sumeet Sharma, S.K. Mohapatra and K. KunduWaste cotton seed oil, Waste mustard oil, Transesterification, Characterisation
-
Process Capability Analysis of MMC Prepared by Combining FDM, Vacuum Moulding and Stir Casting
Rupinder Singh and Sardar SinghFused deposition modeling, Vacuum moulding, Hardness, Process capability, Stir casting.
-
A Study On Hybrid WECSM Setup During Cutting of E-Glass Fibre Epoxy Composite
Anup Malik, Sushant Samir and Alakesh MannaHybrid machining, WECSM, e-glass fibre epoxy composite, Micro slicing.
-
Experimental Investigation of Fluid Flow and Heat Transfer in Microchannels
Rajesh Sharma, Balkar Singh and Vijay Kumar JadonMicrochannel; Electronics cooling; liquid cooling; Heat flux; Heat sink
-
Heat Transfer Enhancement by Using Nanomaterial in Phase Change Material for Latent Heat Thermal Energy Storage System
A.T. Pise, A. V. Waghmare and V. G. TalandageLatent heat, Thermal storage, Phase Change Material, Paraffin Wax, Heat Transfer Fluid, Charging Rate.
-
Optimum Design Parameters for Heat Transfer from Triangular Fin Array within a Rectangular Enclosure
Debasish Das, Ankur Dwivedi and Swati GuptaRectangular Enclosure, Triangular Fin Array, Parametric Optimization, General Full Factorial Design Approach, ANOVA.
-
Effect of Various Parameters on Response Characteristics of WEDM during Machining of Al/SiCp-MMCs
HarmeshKumar, Alakesh Manna and Rajesh KumarWEDM, Al/SiCp-MMCs, Process parameters
-
Analysis of Kerf Taper Angle in Abrasive Water Jet Cutting of Makrana White Marble
Vishal Gupta, M.P. Garg, N.K. Batra and R. KhannaAbrasive water jet machining, Kerf taper angle, Taguchi method, ANOVA.
-
Evaluation of Drilling Performance of Unsaturated Polyester Resin
S. Bandyopadhyay and S. DasResin, Unsaturated Polyester Resin, Drilling, Machinability, Burr.
-
Study of Fluid Flow and Heat Transfer Through Mini-Channel Heat Sink
Hemant Kumar and S.S.SehgalMini Channel, Heat Sink, Fluid Flow, Single Phase, Pressure drop, Heat transfer.
-
Simultaneous Optimization of Multiple Quality Characteristics in Traveling Wire Electrochemical Spark Machining of Pyrex Glass
Basanta Kumar Bhuyan and Vinod YadavaTraveling Wire Electrochemical Spark Machining, Pyrex Glass, MRR, Kw.
-
Improvement in Hardness of LM-6 Aluminum Alloy Green Sand Castings by Taguchi Method
Ravneet Kumar1 and Chandandeep GrewalGreen sand Casting, LM-6 Aluminum alloy, Rockwell hardness, Taguchi L8 (27) orthogonal arrays.
-
Evaluation and Characterization of Different Biomass Residues through Proximate & Ultimate Analysis and Heating Value
Harmandeep Singh, Pawan Kumar Sapra and Balwinder Singh SidhuBiomass fuels, Biomass characteristics, High heating values, Correlation models
-
A Study on the Effect on Fuel Economy of a Two Wheeler by on Board Hydrogen Generation
Gurpartap Singh, Kanwarpreet Singh and Harpreet SinghFuel prices, Two wheelers, Hydrogen, Gasoline, Idle, Fuel Consumption
Volume 2, NO.1 January-June
Volume 2, NO.2 July-December
2012
-
Analysis of Threshold Voltage of Biaxial Strained Silicon nMOSFET
Garima Joshi and Shiromani Balmukund Rahi Biaxial Strained Silicon MOSFET, QME, Threshold Voltage, Si1-x Gex
-
Performance Estimation of a Solar Box Cooker by Approaching Taguchi Technique
Abhishek Saxena 1 , Varun Goel 2 and Amar Patnaik 2 Box cooker, Performance, Solar energy, Taguchi Nomenclature
-
A Case Study on Non-Newtonian Viscosity of Blood through Atherosclerotic Artery
Sapna Ratan Shah Non-Newtonian, Apparent Viscosity, Resistance to Flow, Bingham Plastic Fluid Model, Casson’s Fluid Model
-
A Query Optimization Framework for Fuzzy Relational Databases
S. Deepa Query Optimization, Fuzzy Relational Databases, Fuzzy Cost
-
Search Engine Optimization with Google
Vinit Kumar Gunjan 1 , Pooja 2 , Monika Kumari 3 , Amit Kumar 4 , and Allam Appa Rao 5 Search Engine Optimisation, SEO, Google Optimisation, On Page Optimisation, Off Page Optimisation, Image Optimisation, URL Structure Optimisation
-
Improving Profitability through Value Engineering: A Case study
Darshak A. Desai Value Engineering, Profitability, Security Safes, Concrete Filled Door Safes, Locking Mechanism
-
Study of V2V Communications on Mumbai-Pune Express Highway
Vaishali D. Khairnar 1 and S. N. Pradhan 2 V2V, MPE, 802.11p, Multi-hop Communication
-
Topic Oriented Probability Based and Semi Supervised Document Clustering
M. Karthikeyan and P. Aruna Document Clustering, Text Documents, Word Frequency, Probability, Tokenization, Structural Filtering
-
Loseless Data Embedding Scheme for Medical Image Transmission in E-Diagnosis
A. Ann Ramola Jeyanthi, B. Babu and T.S.Vishnu PriyaVideo Steganography, Medical Images, Information Hiding, Multimedia Messaging Service (MMS), HaarWavelet
-
On Some Complete Tripartite Graphs that Decline Continuous Monotonic Decomposition
Joseph Varghese 1 and A. Antonysamy 2 Graph Decomposition, Extremal Graphs, Complete Tripartite Graphs, Continuous Monotonic Decomposition, Triangular Numbers
-
Vanadium Compounds: As Gamma Rays Shielding Material
HarRavinder Kumar and Tejbir SinghVanadium compounds, Equivalent atomic number, Exposure buildup factor
-
An Overview of the Effect of Hot Corrosion in Waste-to-Energy (WTE) Plant Environment
Harminder Singh, T.S. Sidhu and S.B.S. KalsiCorrosion, Incineration, WTE, Hot Corrosion, Boiler Tubes
-
Non-Uniform Leaf Springs with Geometric Nonlinearity
Dipendra Kumar Roy and Kashi Nath SahaGeometric Nonlinearity, Leaf Spring, Cantilever Beam, Variable Cross Section
-
An Overview of Hydroxyapatite Coated Titanium Implants
Pankaj Vikas Rattan, T.S. Sidhu, Manoj MittalHydroxyapatite, Implants, Titanium, Biomaterials
-
Structural Properties of Anode Composites Precursor of A Solid Oxide Fuel Cell Prepared Via Combustion Synthesis Route
Pankaj Kalra, Rajeev Garg, Neel Kanth Grover and Ajay KumarCermet, NiO-CGO composites, SEM, SOFC, XRD
-
Analyzing Effect of Interactions of Process Parameters on Surface Finish of SUS304 Steel Roller Using RSM Technique
Partap Singh Samra1 and Lakhvir SinghMagnetic Abrasive Finishing (MAF), Scanning Electron Microscope (SEM)
-
Stability of Journal Bearings Considering Slip Condition: A Non Linear Transient Analysis
Raghunandana, John and KanthrajJournal Bearings, No slip, Non Linear Transient Analysis, Mass Parameter
-
Interconnection of Modules of Reconfigurable Modular Robots: A Review
Pardeep Kumar and Buta S. SidhuSelf-reconfigurable Modular Robots, Simulation, Image Recognition, Module Docking, MatLab
-
Parameter Optimization of SAW in Hardfacing Process Using Hybrid Approach of Adaptive Stimulated Annealing and Neural Networks
Vijay Saini1 and Shivali SinglaSAW, Hardfacing, ANN, Optimization, Adaptive Simulated Annealing
-
Analysis for the Manufacturability of Mechanical Parts and its Functionality
Roshan Lal VirdiDFM, Manufacture, CAD
-
Characterisation of 80% Cr3c2 – 20 % (Ni-20cr) Coating and Erosion Behaviour
Rakesh Bhatia, Hazoor Singh and Buta Singh SidhuCharacterisation, Erosion, Microhardness, Porosity and Surface roughness
-
Effect of Process Parameters on Surface Roughness of Mild Steel Processed by Surface Grinding Process
Balwinder Singh and Balwant SinghSurface grinding process, Surface roughness, Mild steel specimen