Design and Analysis of Optimal Maximum Power Point Tracking Algorithm using ANFIS Controller for PV SystemsAuthor : P. Latha Mangeshkar and T. Gowri Manohar
Volume 7 No.2 July-December 2018 pp 100-106
The Photovoltaic cell is considered as one of the most promising devices in photovoltaic generation. It is used to convert solar energy into electrical energy. Nowadays, Photovoltaic generation is developing more rapidly as a renewable energy source. But, the drawback is that Photovoltaic generation is discontinuous because of it depends on the weather conditions. This paper presents a high performance tracking method for maximum power generated by photovoltaic (PV) systems. Based on adaptive Neuro-Fuzzy inference systems (ANFIS), this method combines the learning abilities of artificial neural networks and the ability of fuzzy logic to handle imprecise data. It is able to handle non-linear and time varying problems hence making it suitable for accurate maximum power point tracking (MPPT) to ensure PV systems work effectively. The performance of the proposed method is compared to that of a fuzzy logic based MPPT algorithm to demonstrate its effectiveness.
Maximum Power Point Tracking (MPPT), Photovoltaic (PV) Systems, Fuzzy Logic Controller (FLC), Adaptive Neuro-Fuzzy Inference Systems (ANFIS)
 B. Khan, Non-conventional energy resources: Tata McGraw-Hill Education, 2006.
 D. Radianto, D. Anton Asfani, and T. Hiyama, “Fuzzy Logic Controller Based Maximum Power Point Tracking for Total Cross Tied Photovoltaic Under Partial Shading‟”, 2013.
 A. K. Gautham,S.P.Singh”Fuzzy logic based MPPT Technique for photovoltaic energy conversion system” IEEE TRANSACTIONS ON ENERGY CONVERSION EC, Vol. 22, pp. 439, 2016.
 T. Esram and P. L. hapman, “Comparison of photovoltaic array maximum power point tracking techniques”, IEEE TRANSACTIONS ON ENERGY CONVERSION EC, Vol. 22, pp. 439, 2007.
 M. S. Ngan and C. W. Tan, “A study of maximum power point tracking algorithms for stand-alone photovoltaic systems”, in Applied Power Electronics Colloquium (IAPEC), IEEE, 2011, pp. 22-27, 2011.
 R. Reisi, M. H. Moradi, and S. Jamasb, “A Classification and comparison of maximum power point tracking techniques for photovoltaic system: review”, Renewable and Sustainable Energy Reviews, Vol. 19, pp. 433-443, 2013.
 Subudhi and R. Pradhan, “A comparative study on maximum power point tracking techniques for photovoltaic power systems”, Sustainable Energy, IEEE Transactions, Vol. 4, pp. 89-98, 2013.
 Mellit and S. A. Kalogirou, “Artificial intelligence techniques for photovoltaic applications: A review”, Progress in energy and combustion science, Vol. 34, pp. 574-632, 2008.
 M. S. Benghanem and S. N. Alamri, “Modeling of photovoltaic module and experimental determination of serial resistance”, Journal of Taibah University for science, Vol. 2, pp. 94-105, 2009.
 M. Gaboriault and A. Notman, “A high efficiency, noninverting, buck-boost DC-DC converter”, in Applied Power Electronics Conference and Exposition, 2004. APEC’04. Nineteenth Annual IEEE, pp. 1411-1415, 2004.
 S. Chin, P. Neelakantan, H. P. Yoong, and K. T. K. Teo, “Optimisation of fuzzy based maximum power point tracking in PV system for rapidly changing solar irradiance”, Transaction on Solar Energy and Planning, Vol. 2, 2011.
 A. Otieno, G. N. Nyakoe, and C. W. Wekesa, “A neural fuzzy based maximum power point tracker for a photovoltaic system”, in AFRICON, 2009. AFRICON’09, 2009, pp. 1-6.
 M. A. Denaï, F. Palis, and A. Zeghbib, “Modeling and control of non-linear systems using soft computing techniques”, Applied Soft Computing, Vol. 7, pp. 728-738, 2007.