• #0 (no title)
  • #0 (no title)
  • About
  • Facebook
  • Twitter
  • RSS
(As ISO 9001:2015 Certified Publications)
    • Quick Search
    • Advanced Search
  • Home
  • Editorial Policy
  • Author Guidelines
  • Submission
  • Copyright Form
  • Career
  • Contact us
  • Subscription

Back to Journal

Home»Articles»Design and Development of Scissor Type Car Lifter

JournalCover

Asian Review of Mechanical Engineering (ARME)

Editor Dr. Nukman Bin Yusoff
Print ISSN : 2249 - 6289
Frequency : Half-Yearly

Design and Development of Scissor Type Car Lifter

Author : Dishant Gandhi and Yogesh Dhulugade
Volume 7 No.2 July-December 2018 pp 6-8

Abstract

Vehicles have always been heavy and requiring regular repairs. That was the necessity behind car lifts’ invention. These days, car lifts are an integral part of many garages and repair shops but it’s applications are not limited to that, they’re also used to raise vehicles for storage in places where ramps are inconvenient or if there are space restrictions. The car lift we are working on is used for raising loaded mini-trucks. The main objective of our project is to design and analyze car lift to fit the given parameters and for doing that, the history and types of car lifts are studied, several research papers are referred to. In case of our lift, it had to be more stable and have a higher capacity so as to lift loaded mini-trucks. The project uses Solid works for design and ANSYS for analysis of the CAD model of the lift. After the design is analyzed, the parts are ordered and the lift is assembled.

Keywords

Car Lift, Hydraulic Lift, Scissor Type, Heavy Duty Lifts

Full Text:

References

[1] Balkeshwar Singh, Anil Kumar Mishra, “Analysis and fabrication of remote control lifting jack”, International Journal of Scientific Engineering and Applied Science (IJSEAS), Vol. 1, No. 3, ISSN: 2395‐3470, June 2015.

[2] C. G. Ramachandra, Krishna Pavana, ShivrajShet and Venugopal Reddy, “Design and fabrication of automotive hydraulic jack system for vehicles”, International Journal of Advances in Engineering Research (IJAER), Vol. 6, No. 6, Dec. 2013.

[3] M. M. Noor, K. Kadirgama, M. M. Rahman, M. S. M. Sani and M. R. M. Rejab, “Development of Auto Car Jack Using Internal Car Power”, Malaysian Science and Technology Congress, MSTC08, KLCC, Malaysia, 16-17 Dec. 2008.

[4] Helmi Rashid, “Design Review of Scissors Lifts Structure for Commercial Aircraft Ground Support Equipment using Finite Element Analysis”, International Symposium on Robotics and Intelligent Sensors(IRIS 2012), 2012.

[5] Jaydeep M. Bhatt and Milan J. Pandya, “Design And analysis of an aerial scissor lift”, Journal of Information Knowledge and Research in Mechanical Engineering, Vol. 2, No. 2, pp. 452-455, Nov 12-Oct 13.

[6] Gaffar J. Momin and RohanHatti, “Design, manufacturing, and analysis of hydraulic scissor lift”, International Journal of Scientific Engineering and Applied Science (IJSEAS), Vol. 3, No. 2, April 2015.

[7] Thomas Gomes Jr., “Design, construction, and evaluation of an automotive bridge jack”, June 2011.

[8] Manoj R. Patil and S. D. Kachave, “Time, design, and analysis of scissor jack”, Int. J. Mech. Eng. & Rob. Res, Vol. 4, No. 1, Jan. 2015.

[9] H. Spakman, “Mathematical analysis of actuator forces in scissor lifts”, Technical Document 2643, May 1994.

[10] V. B. Bhandari, “Design of Machine Elements”, Tata McGraw-Hill Publication, Third edition, pp. 843-858

[11] [Online] Available at www.hydraulicscissorlifts.com/catalogues.

Asian Review of Mechanical Engineering (ARME) is a half-yearly international peer-reviewed journal of Mechancial Engineering. One of the objectives of this journal is to disseminate knowledge on various research issues connected with the topics include, but are not limited to:

Statics and dynamics
Strength of materials and solid mechanics
Instrumentation and measurement
Thermodynamics, heat transfer, energy conversion, and HVAC
Combustion, automotive engines, fuels
Fluid mechanics and fluid dynamics
Mechanism design (including kinematics and dynamics)
Manufacturing engineering, technology, or processes
Hydraulics and pneumatics
Engineering design
Product design
Mechatronics and control theory
Material Engineering
Design engineering, Drafting, Computer-Aided Design (CAD) (including solid modeling), and Computer-Aided Manufacturing (CAM)

Vehicles have always been heavy and requiring regular repairs. That was the necessity behind car lifts’ invention. These days, car lifts are an integral part of many garages and repair shops but it’s applications are not limited to that, they’re also used to raise vehicles for storage in places where ramps are inconvenient or if there are space restrictions. The car lift we are working on is used for raising loaded mini-trucks. The main objective of our project is to design and analyze car lift to fit the given parameters and for doing that, the history and types of car lifts are studied, several research papers are referred to. In case of our lift, it had to be more stable and have a higher capacity so as to lift loaded mini-trucks. The project uses Solid works for design and ANSYS for analysis of the CAD model of the lift. After the design is analyzed, the parts are ordered and the lift is assembled.

Editor-in-Chief
Dr. Nukman Bin Yusoff
Department Of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Editorial Advisory Board
Prof.Kevser Dincer
Department of Mechanical Engineering, Selçuk University, Turkey
[email protected]
Dr. Kazi Md. Salim Newaz
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Prof.H.P.S Abdul Khalil
School of Industrial Technology, Universiti Sains Malaysia, Malaysia
[email protected]
Dr. Ong Hwai Chyuan
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Prof.Parviz Malekzadeh
Department of Mechanical Engineering, Persian Gulf University, Iran
[email protected]
Dr. Mohd Faizul Bin Mohd Sabri
Department Of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Chong Wen Tong
Department Of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Mohd Ridha Bin Muhamad
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Khoo Shin Yee
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Chew Bee Teng
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Liew Haw Ling
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]

2016

2015

2014

  • Results
  • Asian Review of Mechanical Engineering (ARME)
  • career

2013

  • Home
  • Shop
  • My Account
  • Logout
  • Contact us
  • The Asian Review of Civil Engineering (TARCE)

2012

  • Asian Journal of Electrical Sciences(AJES)
  • Asian Journal of Computer Science and Technology (AJCST)
  • Asian Journal of Information Science and Technology (AJIST)
  • Asian Journal of Engineering and Applied Technology (AJEAT)
  • Asian Journal of Science and Applied Technology (AJSAT)
  • Asian Journal of Managerial Science (AJMS)
  • Asian Review of Social Sciences (ARSS)

2011

2010

    Table of Contents

    Editorial Note

    Editorial Dr. Nukman Bin Yusoff

    Editor-in-Chief
    Dr. Nukman Bin Yusoff
    Department Of Mechanical Engineering, University of Malaya, Malaysia
    [email protected]
    Editorial Advisory Board
    Prof.Kevser Dincer
    Department of Mechanical Engineering, Selçuk University, Turkey
    [email protected]
    Dr. Kazi Md. Salim Newaz
    Department of Mechanical Engineering, University of Malaya, Malaysia
    [email protected]
    Prof.H.P.S Abdul Khalil
    School of Industrial Technology, Universiti Sains Malaysia, Malaysia
    [email protected]
    Dr. Ong Hwai Chyuan
    Department of Mechanical Engineering, University of Malaya, Malaysia
    [email protected]
    Prof.Parviz Malekzadeh
    Department of Mechanical Engineering, Persian Gulf University, Iran
    [email protected]
    Dr. Mohd Faizul Bin Mohd Sabri
    Department Of Mechanical Engineering, University of Malaya, Malaysia
    [email protected]
    Dr. Chong Wen Tong
    Department Of Mechanical Engineering, University of Malaya, Malaysia
    [email protected]
    Dr. Mohd Ridha Bin Muhamad
    Department of Mechanical Engineering, University of Malaya, Malaysia
    [email protected]
    Dr. Khoo Shin Yee
    Department of Mechanical Engineering, University of Malaya, Malaysia
    [email protected]
    Dr. Chew Bee Teng
    Department of Mechanical Engineering, University of Malaya, Malaysia
    [email protected]
    Dr. Liew Haw Ling
    Department of Mechanical Engineering, University of Malaya, Malaysia
    [email protected]

    Articles

Advanced Search

You can submit your research paper to the journal in just a few clicks. Please follow the steps outlined below: 1. Register your details and select to be an Author 2. Log in with your user name and password 3. ‘Start a new submission’ and follow these 5 steps:

[gravityform id="1" name="Registration" title="false" description="false"]

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

Lorem1 ipsum dolor sit amet, consectetur adipiscing elit. Nulla convallis ultricies scelerisque. Fusce dolor augue, sollicitudin eget lacus vitae, rutrum commodo lacus. Praesent ullamcorper facilisis dui. Sed suscipit id lorem ut dapibus. Integer dictum cursus nisl, quis ullamcorper augue. Sed non rutrum mauris. Maecenas in dolor est. Donec eget sagittis mi. Sed non leo eu odio mollis pulvinar vitae et leo. Integer eu feugiat tortor. Duis massa purus, eleifend id erat eget, hendrerit semper risus. Suspendisse cursus varius dapibus

Lorem1 ipsum dolor sit amet, consectetur adipiscing elit. Nulla convallis ultricies scelerisque. Fusce dolor augue, sollicitudin eget lacus vitae, rutrum commodo lacus. Praesent ullamcorper facilisis dui. Sed suscipit id lorem ut dapibus. Integer dictum cursus nisl, quis ullamcorper augue.

Subscription

Subscription (for 12 issues):
Rs. 5000; Overseas - USD 500;
Cheque drawn in favour of "Informatics Publishing Limited"
Click here to download online subscription form

Download

DD Mailing Address

Lorem1 ipsum dolor sit amet,
Lorem1 ipsum dolor sit amet,
Lorem1 ipsum dolor sit amet.

BACK TO TOP

Outstanding Scholars

The Journals honor Outstanding Scholars in various fields. Scholar of the Month should have contributed to their field and to the larger community. Recipients will be nominated by the Advisory Board and approved by the Editor-in-Chief of the allied journals published by The Research Publication. Scholar of the Month will be displayed in the web portal of the concerned journal.

Please send your brief write up to [email protected]

Editors and Reviewers

The Research Publication is seeking qualified researchers to join its editorial team as Associate Editor, Editorial Advisory Board Member, and Reviewers.
Kindly send your details to [email protected]

Call For Papers

Authors are requested to submit their papers electronically to [email protected] with mentioning the journal title.

Mailing Address

The Research Publication 1/611, Maruthi Nagar, Rakkipalayam Post, Coimbatore – 641 031, Tamil Nadu, India Phone No.: 0422 2461001

  • About
  • Editorial Policy
  • Author Guidelines
  • Contact us
  • Copyright
  • Facebook
  • Twitter
  • RSS

© 2015 The Research Publication. All rights reserved.

The Research Publication
  • Home
  • Editorial Policy
  • Author Guidelines
  • Submission
  • Copyright Form
  • Career
  • Contact us
  • Subscription