Design of Energy Harvesting Circuit for Low Power Application
Author : Nitesh Kumar Dixit , Kamal J Rangra and Y. C. SharmaVolume 7 No.2 July-December 2018 pp 5-7
Abstract
Piezoelectric energy harvesting is the technology to convert wasted vibration energy to an electrical energy output. A considerable amount of energy is dissipated in PEH to flip the output voltage through the internal capacitor and resistor of piezoelectric (PZT) material. One of the most effective techniques to harvest this power loss is called Synchronized Switch Harvesting on Inductor (SSHI) technique. Parallel SSHI technique has been used to flip the terminal voltage of the PEH through external inductor. A new simple and effective self-powered circuit has been introduced in this paper for this purpose. The new circuit uses two capacitors only to detect the flipping points of terminal voltage and enhance the power output
Keywords
Self powered, SSHI, Piezoelectric, PHE
Full Text:
References
[1] E. Dallago, A. Danioni, M. Marchesi and G. Venchi, “An Autonomous Power Supply System Supporting Low-Power Wireless Sensors,” IEEE Transactions on Power Electronics, Vol. 27, No. 10, pp. 4272-4280, 2012.
[2] A. Tabesh and L.G Fréchette, “A Low-Power Stand-Alone Adaptive Circuit for Harvesting Energy From a Piezoelectric Micropower Generator,” IEEE Transactions on Industrial Electronics, Vol. 57, No. 3, pp. 840-849, 2010.
[3] Y.K. Ramadass and A.P. Chandrakasan, “An Efficient Piezoelectric Energy Harvesting Interface Circuit Using a Bias-Flip Rectifier and Shared Inductor,” IEEE Journal of Solid-state Circuits, Vol. 45, No. 1, pp. 189-204, 2010.
[4] N.S. Shenck and J. A. Paradiso, “Energy scavenging with shoemounted piezoelectrics,” Micro, IEEE, Vol. 21, No. 3, pp. 30-42, 2001.
[5] K. A. Cook-Chennault, N. Thambi, and A. M. Sastry, “Powering MEMS Portable Devices – A Review of Non-regenerative and Regenerative Power Supply Systems with Special Emphasis on Piezoelectric Energy Harvesting Systems”, Smart Mater. Struct., Vol. 17, 043001, pp. 33, 2008.
[6] H. A. Sodano, D. J. Inman, and G. Park, “A Review of Power Harvesting from Vibration using Piezoelectric Materials”, The Shock and Vibration Digest, Vol. 36, No. 3, pp. 197-205, May 2004.
[7] G.K. Ottman, H.F. Hofmann and A.C. Bhatt, and G.A. Lesieutre, “Adaptive Piezoelectric Energy Harvesting Circuit for Wireless Remote Power Supply,” IEEE Transactions on Power Electronics, Vol. 17, No. 5, pp. 669–676, 2002.
[8] E. Lefeuvre, D. Audigier, C. Richard and D. Guyomar, “Buck-Boost Converter for Sensorless Power Optimization of Piezoelectric Energy Harvester,” IEEE Transactions on Power Electronics, Vol. 22, No. 5, pp. 2018-2025, 2007.
[9] I. Darmayuda, Y. Gao, M.T. Tan, S.J. Cheng, Y. Zheng, M. Je and C.H. Heng, “A Self-Powered Power Conditioning IC for Piezoelectric Energy Harvesting From Short-Duration Vibrations,” IEEE Transactions on Circuits and Systems II: Express Briefs, Vol. 59, No. 9, pp. 578-582, 2012.
[10] T. Paing and R. Zane, “Design and optimization of an adaptive nonlinear piezoelectric energy harvester,” in IEEE Applied Power Electronics Conference and Exposition (APEC), 2011.
[11] D. Guyomar, A. Badel, E. Lefeuvre, and C. Richard, “Toward energy harvesting using active materials and conversion improvement by nonlinear processing,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, Vol. 52, No. 4, pp. 584 – 595, 2005.
[12] N. Krihely, and S. Ben-yaakov, “Self-Contained Resonant Rectifier for Piezoelectric Sources Under Variable Mechanical Excitation,”, IEEE Transactions on Power Electronics, Vol. 26, No. 2, pp. 612-621, 2011.
[13] E. Lefeuvre, A. Badel, C. Richard, L. Petit and D. Guyomar, “A comparison between several vibration-powered piezoelectric generators for standalone systems,” Sensors and Actuators A: Physical, Vol. 126, pp. 405-416, 2006.
[14] G.W.Taylor, J.R. Burns, S.M. Kammann, W.B. Powers and T.R. Wel, “The energy harvesting eel: A small subsurface ocean/river power generator,” IEEE Journal Oceanic Engineering, Vol. 26, pp. 539-547., 2001.