The Asian Review of Civil Engineering (TARCE)
Durability Studies on Steel Slag Concrete and Comparison with Conventional ConcreteAuthor : V.R. Sajith and V.Niranjan
Volume 7 No.1 January-June 2018 pp 15-22
This is an experimental project which deals with the studies on the durability of steel slag as replacement of coarse aggregate in concrete. This project outlines the method of preparation, testing procedure and salient results on the concrete that is manufactured using the waste products of steel industries. In this project, concrete of grade M40 was investigated. The raw materials for making concrete will be Ordinary Portland Cement (OPC), fine aggregate, coarse aggregate and steel slag. The percentage of cement, water and fine aggregate will be kept constant within the mixture, while the percentage of steel slag as the replacement of coarse aggregate 50%. Cubes measuring 150 mm x 150mm x 150 mm was casted to investigate the properties of concrete specimen after 28 days. This project proposes to evaluate the Durability properties of concrete made with steel slag. Tests like water absorption test, acid attack test, sulphate attack test, exposure conditions, fire resistance was conducted to test the durability of the concrete.
Durability, Steel Slag Concrete, Conventional Concrete
 IS 10262:2009 Concrete Mix Proportioning.
 IS 456: 2000 Plain and Reinforced Concrete Code of Practice.
 IS 383: 1970 Specifications for Coarse and Fine aggregates from Natural Sources for Concrete
 M. S. Shetty, “Concrete Technology, Theory and Practice”.
 P.G. Fookes, “An introduction to the influence of natural aggregates on the performance and durability of concrete”, Quarterly Journal of Engineering Geology, Vol. II, 1980.
 C. Arum and A.O. Olotuah, “Making of strong and durable concrete”,2014.
 V. Subathra Devi and B.K.Gnanavel, “Properties of concrete manufactured using steel slag”, Vol. 1, pp. 97, 2014.
 K. Thangaselvi, “Strength and Durability of Concrete Using Steel Slag as a Partial Replacement of Coarse Aggregate in Concrete”, Vol. 2, No. 7, July 2015.
 J. Saravanan and N. Suganya, “Mechanical Properties of Concrete Using Steel Slag Aggregate”, Vol. 4, No. 9, May 2015.
 Prof. Rohan S Gurav, Prof. Brij Bhushan Sand Prof. Maneeth P D, “Experimental Investigation on Partial Replacement of Natural Fine Aggregate by Steel Slag”, Vol. 3, No. 9, pp.434, 2015.
 P.S.Kothai and Dr.R.Malathy, “Utilization Of Steel Slag In Concrete As A Partial Replacement Material for Fine Aggregates”, Vol. 3, No. 4, pp. 134, April 2012.
 Jigar P. Patel, “Broader use of steel slag aggregates in concrete”, No. 1, pp. 6, May 2006.