
Asian Review of Mechanical Engineering (ARME)
Erosion Behaviour of Chromium Based Hardfacing Alloy
Author : Gaganpreet Singh Sandhu, Hazoor S. Sidhu and Sukhpal Singh ChathaVolume 2 No.2 July-December 2013 pp 72-74
Abstract
In the present study commercial available chromium based hardfacing alloy (CPET 071) was deposited on SS304 steel by manual metal arc welding process to investigate the erosion behaviour. Solid particle erosion study was carried out using air jet erosion tester rig. Erosion testing was done at room and 400°C temperature at different impingement angles i.e. 30° and 90°. Optical microscopy technique is used to analyse the microstructure. Microstructure of the deposited hardfacing alloy has been formed to be free from defect such as crakes and porosity, with typical dendritic structure. Erosion rate of the base and hardfaced steel has been found to be higher at 400 °C temperatures with 30° impingement angle.
Keywords
Microstructure, Hardfacing, Microhardness, Erosion
References
Asian Review of Mechanical Engineering (ARME) is a half-yearly international peer-reviewed journal of Mechancial Engineering. One of the objectives of this journal is to disseminate knowledge on various research issues connected with the topics include, but are not limited to:
Statics and dynamics
Strength of materials and solid mechanics
Instrumentation and measurement
Thermodynamics, heat transfer, energy conversion, and HVAC
Combustion, automotive engines, fuels
Fluid mechanics and fluid dynamics
Mechanism design (including kinematics and dynamics)
Manufacturing engineering, technology, or processes
Hydraulics and pneumatics
Engineering design
Product design
Mechatronics and control theory
Material Engineering
Design engineering, Drafting, Computer-Aided Design (CAD) (including solid modeling), and Computer-Aided Manufacturing (CAM)
In the present study commercial available chromium based hardfacing alloy (CPET 071) was deposited on SS304 steel by manual metal arc welding process to investigate the erosion behaviour. Solid particle erosion study was carried out using air jet erosion tester rig. Erosion testing was done at room and 400°C temperature at different impingement angles i.e. 30° and 90°. Optical microscopy technique is used to analyse the microstructure. Microstructure of the deposited hardfacing alloy has been formed to be free from defect such as crakes and porosity, with typical dendritic structure. Erosion rate of the base and hardfaced steel has been found to be higher at 400 °C temperatures with 30° impingement angle.
Editor-in-Chief
Dr. Nukman Bin Yusoff
Department Of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Editorial Advisory Board
Prof.Kevser Dincer
Department of Mechanical Engineering, Selçuk University, Turkey
[email protected]
Dr. Kazi Md. Salim Newaz
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Prof.H.P.S Abdul Khalil
School of Industrial Technology, Universiti Sains Malaysia, Malaysia
[email protected]
Dr. Ong Hwai Chyuan
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Prof.Parviz Malekzadeh
Department of Mechanical Engineering, Persian Gulf University, Iran
[email protected]
Dr. Mohd Faizul Bin Mohd Sabri
Department Of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Chong Wen Tong
Department Of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Mohd Ridha Bin Muhamad
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Khoo Shin Yee
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Chew Bee Teng
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Liew Haw Ling
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
2016
2015
2014
2013
2012
- Asian Journal of Electrical Sciences(AJES)
- Asian Journal of Computer Science and Technology (AJCST)
- Asian Journal of Information Science and Technology (AJIST)
- Asian Journal of Engineering and Applied Technology (AJEAT)
- Asian Journal of Science and Applied Technology (AJSAT)
- Asian Journal of Managerial Science (AJMS)
- Asian Review of Social Sciences (ARSS)
2011
2010
Table of Contents
Editorial Note
Editor-in-Chief
Dr. Nukman Bin Yusoff
Department Of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Editorial Advisory Board
Prof.Kevser Dincer
Department of Mechanical Engineering, Selçuk University, Turkey
[email protected]
Dr. Kazi Md. Salim Newaz
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Prof.H.P.S Abdul Khalil
School of Industrial Technology, Universiti Sains Malaysia, Malaysia
[email protected]
Dr. Ong Hwai Chyuan
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Prof.Parviz Malekzadeh
Department of Mechanical Engineering, Persian Gulf University, Iran
[email protected]
Dr. Mohd Faizul Bin Mohd Sabri
Department Of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Chong Wen Tong
Department Of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Mohd Ridha Bin Muhamad
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Khoo Shin Yee
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Chew Bee Teng
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Dr. Liew Haw Ling
Department of Mechanical Engineering, University of Malaya, Malaysia
[email protected]
Articles
Advanced Search
You can submit your research paper to the journal in just a few clicks. Please follow the steps outlined below: 1. Register your details and select to be an Author 2. Log in with your user name and password 3. ‘Start a new submission’ and follow these 5 steps:
Privacy Statement
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
Privacy Statement
The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.
Lorem1 ipsum dolor sit amet, consectetur adipiscing elit. Nulla convallis ultricies scelerisque. Fusce dolor augue, sollicitudin eget lacus vitae, rutrum commodo lacus. Praesent ullamcorper facilisis dui. Sed suscipit id lorem ut dapibus. Integer dictum cursus nisl, quis ullamcorper augue. Sed non rutrum mauris. Maecenas in dolor est. Donec eget sagittis mi. Sed non leo eu odio mollis pulvinar vitae et leo. Integer eu feugiat tortor. Duis massa purus, eleifend id erat eget, hendrerit semper risus. Suspendisse cursus varius dapibus
Lorem1 ipsum dolor sit amet, consectetur adipiscing elit. Nulla convallis ultricies scelerisque. Fusce dolor augue, sollicitudin eget lacus vitae, rutrum commodo lacus. Praesent ullamcorper facilisis dui. Sed suscipit id lorem ut dapibus. Integer dictum cursus nisl, quis ullamcorper augue.
Subscription
Subscription (for 12 issues):
Rs. 5000; Overseas - USD 500;
Cheque drawn in favour of "Informatics Publishing Limited"
Click here to download online subscription form
DD Mailing Address
Lorem1 ipsum dolor sit amet,
Lorem1 ipsum dolor sit amet,
Lorem1 ipsum dolor sit amet.