The Asian Review of Civil Engineering (TARCE)
Experimental Study on Glass Fibre Reinforced Steel Slag Concrete with Fly AshAuthor : Sreelakshmi Vijayakumar and R. Kokila
Volume 7 No.2 July-December 2018 pp 45-48
Concrete is a mixture of cement, fine aggregate, coarse aggregate and water. Globally concrete is the backbone for the large development of infrastructure. With the experimental investigations and proven results mineral admixtures and other waste materials are used in the concrete successively. In this present experimental study, the flexural strength of beam for both the conventional concrete and steel slag glass fibre reinforced fly ash concrete is compared for M30 grade of concrete. The test to be done is having 1% of glass fibre to the volume of concrete, steel slag is added at a constant percentage of (30%) by weight of fine aggregate throughout this experimental study. The mineral admixture fly ash has been added at three different percentages (ie; 5%, 10% and 15%) by weight of cement. Flexural strength of beam is identified.
Glass Fibre, Steel Slag, Concrete, Fly Ash
 IS 456, Plain and Reinforced Concrete Code of Practice, 2000.
 IS 3812, Fly ash use as pozzolana and Admixture , Bureau of Indian Standards , New Delhi, 1981
 IS 8112, Indian standard specification for 43 grade ordinary Portland Cement, Bureau of Indian Standards, New Delhi, 1989.
 IS 10262, Recommended guidelines for Concrete Mix Design, Bureau of Indian Standards, New Delhi, 1982.
 Concrete Technology – Theory and Practice, M. S. SHETTY.
 L. Kothai and R. Malathy, “Mechanical properties of self-compacting concrete with partial replacement of natural sand by steel slag”, International Journal of Scientific & Engineering Research, Vol. 7, No. 2, pp. 536-611, 2014.
 M. SoundarRajan, “Study on strength properties of concrete by partially replacement of sand by steel slag”, International Journal on Engineering Technology and Sciences, Vol. 1, No. 6, pp. 601-636, 2014.
 A. G. Ganeshkumar, “Experimental analysis of e-glass fiber and fly ash reinforced to e-waste aluminium”, Vol. 4, No.2, pp 340-356, 2014.
 Riyaz khan, “Effect of unprocessed steel slag on the strength of concrete when used as fine aggregate”, International journal of civil engineering and technology, Vol. 3, pp. 231-239, 2013.
 R. Thangaraj, “Feasibility Study of Fly Ash as a Replacement for Fine Aggregate in Concrete and its Behaviour under Sustained Elevated Temperature”, International Journal Of Scientific & Engineering Research, Vol. 1, No. 5, pp. 235-301, 2013.