Asian Journal of Engineering and Applied Technology (AJEAT)
Mechanical Properties of Self-Compacting Geopolymer Concrete Using Fly Ash and GGBSAuthor : S. Thirupathiraj , S. M. Renuka and M. Dineshkumar
Volume 7 No.1 Special Issue:April 2018 pp 19-23
Cement is the core content for the concrete mix. Manufacturing of cement causes CO2 emission which leads to the pollution, health and environmental problems like global warming to control over the adverse effect we can prefer geopolymer concrete which is not a cement concrete. Factory wastes such as fly ash, ground granulated blast furnace slag (GGBS), silica fume and Metakaolin can be used as alternate for cement. This study mainly focus on the ratio of fly ash and ground granulated blast furnace slag (GGBS) for optimum levels which nearly matches the cement concrete properties. This study involves the various tests like slump flow, compression testing, split tensile strength and flexural strength of self-compacting geopolymer concrete. Self-compacting concrete is a highly flowable concrete that spreads into the form without the need of mechanical vibration. Self-compacting concrete is a non-segregating concrete that is placed by means of its own weight. The advantages include improved constructability, Labour reduction, bond to steel, Flow into complex forms, reduced equipment wear etc. The aim of this study is to achieve an optimum self-compacting concrete geopolymer concrete mix proportion using fly ash and ground granulated blast furnace slag (GGBS). Then the study will be further extended by investigating the durability properties of self-compacting geopolymer concrete.
Geopolymer Concrete, Fly Ash, Compressive Strength, Split Tensile Strength, Flexural Strength
 N. Bouzoubaa and M. Lachemi, “Incorporating High-Volumes of Results”, Cement and Concrete Research, pp. 413, 2001.
 Kishor S. Sable and Madhuri K. Rathi, “Effect of different type of steel fiber and aspect ratio on mechanical prope self-compacting concrete”, International Journal of Engineering and Innovative Technology, Vol. 2, No. 1,pp. 184-188, 2012.
 M. Nehdi, M. Pardhan andS. Khoshowski, “Durability of self-compacting concrete incorporating high volume replacement”,Composite Cements Research, Vol. 34, No. 11, pp. 2103, 2004.
 HemanthSood, R. Khitoliya,“European Standard for Testing Self Compacting Concrete in Indian Conditions”, International Journal of Recent Trends in Engineering, Vol. 1, No. 6, pp. 41, 2009.
 N. R. Gaywala andD. B Raijiwala, “Self-compacting Concrete: A concrete of the decade”, Journal of Engineering Research and Studies, Vol. 2, pp. 213, 2011.
 K. Ganesh Babu and Sree Rama Kumar, “Efficiency of GGBS in concrete”, Cement and Concrete Research, pp. 1031–1036.
 A. Navaneethakrishnan andV. M. Shanthi, “Experimental Study of Self Compacting Concrete using Silica Fume”, International Journal
of Emerging Trends in Engineering and Development, Vol. 4, No. 2, 2012.
 Amir Juma andE. Rama Sai, “A Review on Experimental Behavior of Self Compaction Concrete Incorporated with Rice Husk Ash”, International Journal of science and Advanced Technology, Vol. 2, pp. 75.
 D. Bonen, Y. Deshpande, J..Olek, L. Struble, D. Lange and K. Khayat, “Robustness of SCC”, Self-Consolidating Concrete, D. Lange, ed., The Centre for Advanced Cement based Materials, Northwestern University, Illinois, USA, pp.4-22, 2007.
 Daniel L.Y. Kong, Jay G. Sanjayan, “Effect of elevated temperatures on geopolymer paste, mortar and concrete”, Cement and Concrete Research, Vol.40, pp.334-339, 2010.
 Gesoglu, M. Güneyisi and E. Özbay, “Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume”, Construction and Building Materials, Vol. 23, No. 5, pp. 1847-1854, 2009.
 Hemant Sood, “Incorporating European Standards for Testing Self Compacting Concrete in Indian Conditions” International Journal of Recent Trends in Engineering, Vol. 1, pp. 6-10, 2009.
 D. M. A Huiskes, A. K. luan and H. J. H. Brouwers, “Design and performance evaluation of ultra-light weight geopolymer concrete”, Materials and Design, Vol. 89, pp. 514–528, 2014.
 Z. Jiang and S. Mei, “Properties of Self Compacting Concrete with Machine-Made Sand and High-Volume Mineral Admixtures”, The Open Construction and Building Technology Journal, Vol. 2 pp.96-102,2008.
 Sarker, P. K. Sean Kelly and Z. Yao, “Effect of fire exposure on cracking, spalling and residual strength of fly ash geopolymer concrete”, Materials and Design, Vol. 63, pp. 584–592, 2014.
 Sua H, Xua J and Rena W, “Mechanical properties of geopolymer concrete exposed to dynamic compression under elevated temperatures”, Vol. 42, pp. 3888–3898, 2017.
 T. G. Ushaa, R. Anuradha, and G. S. Venkatasubramani, “Flexural Behavior of Self-Compacting Geopolymer Concrete using GGBS with Various Replacements of r-sand and m-sand”, ARPN Journal of Engineering and Applied Sciences, Vol. 10, pp. 14-17, 2015.
 A. Vasquez, V. Cardenas, A. Rafael and Ruby Mejía de Gutierrez, “Geopolymer based on Concrete Demolition Waste”, Advanced Powder Technology, Vol. 27, pp. 1173–1179, 2015.
 W. P. S. Dias, G. A. P. S. N. Seneviratne, S. M. A. Nanayakkara, “Offshore sand for re-inforcedconcrete”, pp. 1377-1384, 8 June 2007.
 A. Adam, “Strengthand Durability Properties of Alkali Activated Slagand FlyAsh-Based Geopolymer Concrete”,School of Civil, Environmental andChemical Engineering, RMIT University Melbourne, Australia, pp. 30-35, August 2009.
 R. Sathia, K. Ganesh Babu, M. Santhanam, “Durability Study Of Low CalciumFlyAshGeopolymerConcrete”,the3rd ACF Int. Conf. -ACF/VCA, pp. 1153-1159, 2008.
 U. N. Barot, “Experimental Investigation on Flexural and Shear Behaviour ofRe-inforcedConcrete Beams using GFRP Reinforcement”, Major project,Nirma Univerisity, Ahmedabad, Gujarat, 2009.
 S. Basack and R. D. Purkayastha, “Engineering properties of marine clays fromtheeastern coast of India”, Journal of Engineering and Technology Research, Vol.1, No.6, pp. 109-114, Sept. 2009.